4E1 + 100M PDH Multiplexer

4E1+100M PDH Multiplexer 1.Overview PDH Multiplexer can multiplex 4/8/16E1,Ethernet (2*10/100Mbps) and V.35 signals in one fiber channel to transmit. It is suitable for low capacity, point-to-point application of remote transmission. The equipment is reliable, stable, easy to install and maintain, which can be monitored from Fi-view-MST management software. PDH Multiplexer is widely used in voice and data application field. 2.Features Providing up to 16E1,2 10/100Mbps Ethernet and 1 V.35 channel Ethernet port support VLAN and flow control Support the local/remote E1 loop back For V.35 channel, framed and unframed mode optional. Support internal clock, E1 recovery clock or V.35 line clock. Providing an RS232/RS485 asynchronous interface optional Complete alarm functions Standalone and rack mount module optional 100-240VAC and -48VDC optional 3.Management Support local and remote management Support Console, WEB and SNMP management Show details of system information, including Chassis name, location information, IP address, start-up time, software and hardware version View & configure the working status of local and remote device, including connection status, speed, half/full duplex mode, port status Real-time alarm monitor and history alarm management are both available Online firmware updating 4.Specifications 4.1Optical Port Rate: 150Mb/s+/-50ppm Wavelength: 1310nm/1550nm Sensitivity: Better than -36dB Connector: FC/SC/ST 4.2E1 Port Rate: 2048Kbps Code type: HDB3 Compliant with G.703, G.704 Impedance: 75 ohm unbalanced & 120 ohm balanced Physical connector: BNC for unbalanced & RJ45 for balanced Unframed mode Numbers: 4 4.3Ethernet ports Compliant with: IEEE802.3 Rate: 10/100Mbps Full/Half duplex auto-negotiation Physical connector: RJ45 MDI/MDI-x auto-negotiation Ethernet port: 2-switch ports 4.4V.35 Port Compliant with V.35 standard Data rate: 2048Kbps or N*64Kbps, N =1 31 Operation mode: DTE/DCE optional PCM30/PCM31 optional Three kinds of loop back mode Physical connector: DB25 female jack Numbers: 1 4.5Operating Environment Temperature: 0 50 Relative Humidity: 20 90% 5.Order Information F9-120-04FA 4E1 port Multiplexer, 75&120ohm both OK, Optical port: distance:40km, FC/PC, SM1310nm, Standalone, 220VAC power supply F9-120-04F23A 4E1 port Multiplexer, 75&120ohm both OK, 2-port 10/100Mbps line-speed Ethernet. Optical port: distance:40km, FC/PC, SM1310nm, Standalone, 220VAC power supply F9-120-04FD 4E1 port Multiplexer, 75&120ohm both OK, Optical port: distance:40km, FC/PC, SM1310nm, Standalone, -48VDC power supply F9-120-04F23D 4E1 port Multiplexer, 75&120ohm both OK, 2-port 10/100Mbps line-speed Ethernet. Optical port: distance:40km, FC/PC, SM1310nm, Standalone, -48VDC power supply