4E1 + 100M PDH Faser-optischer Multiplexer

Brief Introduction IDM CH-120NET PDH multiplexer transmits 4E1 and two 100Mbps Ethernet networks over one or two fiber channels. The optical interface supports simple ALS function, code of E1 interface is HDB3 which meets all the international standards. It also has perfect monitoring and alarm function, high degree of integration, low power consumption and stable performance. Both desktop type and integrated type are available. 220VAC/-48VDC power supply alternative. It can be widely used in the mobile base stations, and DDN private network and etc. Features 1.Provide standard 4E1 transmission and two 100M Ethernet. 2.Ethernet ports support VLAN and flow control. 3.155Mbps speed rate of the optical interface and transmission distance more than 50km. 4.Support E1 loopback of COT (central office terminal) and RT (remote terminal), easy to test and manage. 5.Optical interfaces with 1+1 channel protection.(Either one fails, the other will back it up) 6.NMS interface optional (RS232/Ethernet). Specifications Power Supply 220VAC/-48VDC Consumption: 40W±10% Optical interface Rate 155Mbps±50ppmWavelength1310nm/1550nmPhysical connectorFC/SCSensitivityBetter than -36dBm E1 interface Channels 4Rate2.048Mbps±50ppmComply withITU-T G.703 CodeHDB3Impedance75 unbalanced and 120 balanced Ethernet interface Rate 100Mbps, 10M/100M auto-negotiationComply withIEEE802.3, 10/100Base-TXDuplexFull/Half auto-negotiation Operating Environment Temperature: 0ºC 40ºC Humidity: 90% (non- coagulation) Dimensions 440mm×230mm×45mm (Width × Depth × Height)