36V 2.7A Schaltnetzteil (S-100-36)

ModelS-100-3S-100-5S-100-7.5S-100-12S-100-15S-100-24S-100-27S-100-48DC output voltage3V5V7.5V125V15V24V27V48VOutput voltage range(Note:2)±2%±2%±1%±1%±1%±1%±1%±1%Rated output current20A20A13.6A8.5A6.7A4.5A3.7A2AOutput current range0-20A0-20A0-13.6A0-8.5A0-6.7A0-4.5A0-3.7A0-2AWave and noise(Note:3)150mV150mV150mV150mV150mV150mV200mV240mVInlet stability(Note:4)±0.5%±0.5%±0.5%±0.3%±0.3%±0.2%±0.2%±0.2%Load stability(Note:5)±1%±1%±0.5%±0.3%±0.3%±0.2%±0.3%±0.2%DC output power60W100W102W102W100.5W108W99.9W96WEfficiency70%78%81%81%81%84%84%84%Adjustable range for DC voltage2.85 3V4.75 5.5V6.75 8.25V10.8 13.2V13.5 16.5V21.6 26.4V26 32V43.2 52.8VInput current2.4A/115V 1.2A/230VAC inrush currentCold-start current 30A/115V 60A/230VLeakage current<1mA/240VACOverload protection105% 150%150% 200%105% 150%Type: Output shutdown Reset: Recycle AC ON/OFFTemperature coefficient±0.03%/°c(0 50°c)Setup, rise , hold up time200ms,100ms, 30msVibration10 500Hz, 2G 10min,/1cycle, Period for 60min, Each axesWithstand voltageInput and output internal: 1.5KvAC, Input and enclosure:1.5KvAC, Output and enclosure:0.5KvACWorking temperature and humidity-10°c +60°c(Refer to output derating curve), 20% 90%RHWeight0.65KgsSafety standardsMeet UL 1012 requirementNot apply forr the markEMC standardsMeet FCC PART 15 J Conduction class BNote: 1. The testing condition for the paramenter above is: 230VAC input, rated load, 25°c 70% RH. Temperatuer. 2. Error: include the setting error, line stability and load stability.(Note:5) 3. Wave test: adopting "A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting. 4. Inlet woltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to 100%