3 Phase 220V Hybrid Schrittmotortreiber DQ3522M

DQ3522M is3 phase stepper motor driver based on DSP control. It is new fully digital driver configured by advanced DSP chip and 3 phase inverting driver module. The driving voltage is AC110V-220V and rated current is under 5.0A. The mating motor is 3 phase hybrid stepper motor with 57-130mm outer diameter. The internal driver circuit is similar to that of servo control theory, which makes the motor run smoothly, almost no vibration and noise. The max positioning accuracy can be up to 60,000 steps per revolution. DQ3522M is widely used in large/medium NC equipment with high resolution like engraving machines, medium CNC machine tools, computer embroidery machine, packaging machinery and etc.Features:1) High performance and competitive price2) 16-channel equal angle torque micro steps, max resolution 60,000 steps/R3) Max response frequency up to 200Kpps4) Coil current will be automatically reduced to 1/2 of pre-set current when stepper pulse stops over 100ms.5) Optical isolating signals I/O6) Driving current can be adjusted from 1.2A/phase to 5.0A/phase through the 16 channels.7) Single power supply (Voltage range: AC110V-220V)8) Phase memory function (Note: The driver can memorize the motor phase automatically when the input stops over 3 seconds. And it also can recover the phase automatically when it is re-powered or MF signals changes from low level to high level.) 9) DQ series stepper motor drivers have different Algorithms for high and low speed, so motor runs more stablely and smoothly at highand low speed.