3,4-ethylendioxythiophen EDOT

3,4-ethylenedioxythiophene, EDT, EDOT, Monomer of PEDT/PEDOTMolecular formula: C6H6O2SMolecular weight: 142.18Properties: near colorless to yellow liquid; unpleasant odor; boiling point 225°C;melting point 10.5°C; density 1.34g/m³(20°C); vapor pressure0.05mp(20°C); solubility in water 2.1g/L(20°C); flash point 104°C;ignition point360°CUsage: mainly used as a monomer to synthesize the conductive polymer PEDTAssay: ≥99.5% (GC)The polymerization can be carried out electrochemically or with an oxidizing agent such as an iron (III) salt. Polymerization in solution usually leads to insoluble, infusible powders with powder conductivity values up to 30 S/cm. Thin coatings prepared e.g. by spin-coating reveal conductivities of more than 200 S/cm. PEDT displays markedly better properties in comparison with other organic conductors such as polypyrrole and polyaniline. Higher transmission in the visible spectrum with comparable conductivity = transparent, colorless to bluish coatings Minimum surface resistively of approximately 150 ohms/square can be achieved, depending on the manufacturing conditions Better resistance to hydrolysis Good photo stability and good thermal stability High absorption in the range of 900 to 2000 nm No absorption maximum in the visible spectrum up to 800 nm