250 einseitige Wellpappe (Patronentyp) - BHR-A

1. Sizing system: Automatic idle device with paste reel, when the temporary shutdown, avoid glue dried liquid surface of the paste reel * Cut paste reel: diameter 180MM steel, chrome plated surface by grinding. * Use paste plate design, and the amount of paste round of paste on the full supply, so when the machine speed changes, the paste round the surface of the paste also maintain an appropriate film thickness. * Paste plate made of stainless steel, and pulp with the design of electric file, forward, backward, open, co-interference, while the left, while the right. 2. Preheating reel core paper: 400MM diameter of a steel products, to keep pace with corrugated wheel rotation. 3. Tissues Preheat reel: diameter of steel products a 400MM, with a brake device can control the tension. 4. • the corrugated reel: diameter 360MM, combined with nickel chromium Diamond manufacturing, heat treatment SHORE75 degrees hardness, tungsten carbide surface and the purposes of treatment. • Under the corrugated reel: diameter 360MM, combined with nickel chromium Diamond manufacturing, heat treatment SHORE75 degrees hardness, tungsten carbide surface and the purposes of treatment. • Pressure reel: diameter 324MM, the carbon steel surface by grinding and chrome plating. • paste reel: diameter 254MM steel products, surface treatment by sandblasting and chrome. • Automatic idle device attached to paste reel, when the temporary shutdown, avoid glue dried Gu liquid surface of the paste reel. • Cut paste reel: diameter 140MM steel, chrome plated surface by grinding. * Upper and lower corrugated roller and pressure roller adapted to control the air pressure system, pneumatic system control wheel to paste. * Under the pressure of corrugated reel reel reel and paste, cut and paste under the corrugated reel reel. Paste the gap between the reel and attach an electric tuning value displayed. * Pressure on the corrugated wheel and wheel gap adjustment, the operating side and drive side separately adjusted. 5. Electric device attached to every batter. A suction fan attached to 15HP. Control box and operating panel with a group. Shows the frequency of a PLC. 6. Driver-side with the protective cover in order to maintain safe operation 7. Operating side of the box and operate with a key set of protection 8. Corrugated and housing to the whole exchange, sizing can be a whole out of body 9. Independent noise-free split gearbox, universal joint drive axis 10. The main drive motor inverter Tatung 11. Frequency independent control of the brand from Germany Schneider 12. With two carts 13. Roller, paste rotation BHS