20mW 532nm DPSS SLM Green Laser, der SA-Serie

GL532SA-020Optical ParameterOutput Wavelength532nmSpectral Linewidth<0.00001nmOutput Power20mWSpatial ModeTEM00Longitude ModeSingleOperating ModeCWMode Quality (M2)<1.2Beam Divergence, Full Angle1.5 ± 0.2mrad [1]Beam Diameter (1/e2) @ Exit1.0 ± 0.2mmPower Stability3% (rms, over 2 hours, T= 25°C) [2]5% (rms, over operating temperature)Beam Pointing Stability<50μrad over 2 hours (ambient ±5°C )Polarization, Linear100:1Amplitude Noise (20Hz to 20MHz)<0.5% rmsCoherent Length>50mResidual IR<0.01%Electrical ParameterPower SupplyADR-180DDDR-2005DDR-2012Desktop PSU5VDC Driver12VDC DriverInput Voltage85 240VAC, 50/60Hz5VDC12VDCModulationNoneMechanical ParameterDimensions of Laser Head140 × 49 × 42mmWeight of Laser Head0.5KgDimensions of Power Supply150 × 110 × 48mm87 × 50 × 32mm105 × 72 × 30mmWeight of Power Supply0.6Kg0.1Kg0.1KgReliabilityWarm Up Time<10 minutesCoolingForced-air cooled [3]Operating Temperature, Case10°C 35°CStorage Temperature-20°C 60°CExpected Operation Lifetime10000 hoursWarranty12 months [4]Note[1]0.1mrad 1.0mrad beam divergence is available upon request. [2]Better Stability (<1% rms, over 2 hours, 25°C) or ultra-Stability (<1%rms, over 24hours, 25°C)is available upon request. [3]The Laser is designed to operate without heat sink. Do not restrict air circulation around the device; an additional heat sink can be used to maximize the performance and life time of the laser. [4]2-Year Warranty is available upon request.