2 Batterie-Wasser-Pumpe

2 Battery Water Pump We are the production of drinking water pump manufacturers. Battery Directions for use 1. Unscrew the cap on the pump handle and inset two Dsize batteries into the handle in the direction indicated by the (+) and (-) markings. 2. Remove the tube cover cap and attatch with fastener top bottle neck,after adjusting with the bottle cap to height of container. Be sure keep suction tube cover1/4 to 3/4 above the bottom of container. 3. Snap on the discharge spout to the discharge hole on the frame of the pump. 4. Push button and the water will flow, push again to stop. 5. When used for the first time, let water run for 30 to 60 seconds to clean out pump. Feature of Battery Pump 1. ECONOMICAL 2D size batteries will last for 8 to 10 months.(based on 5 gallons per week usage)Able to discharge about 260 gallons(1.000 liters)when used continuously. 2. SOFT-TOUCH BUTTON Children, seniors and adults can easily use the pump. Easily installed and used at home, restaurants, office, hospital, parties, etc. 3. APPLICABLEIN OTHERLIQUIDS Applicable in liquids with low viscisity, such as spot drink, alcoholic drink,etc. in addition to water. 4. OTHER Useble with many lemonades types of containers. Adjustable the bottle cap according to the depth of the container. Rechargeable. 1. Keep away from heat or flame 2. Don′t hold upside down and store upright when it is not in use 3. Do not run dry .switch on after submerging in the water 4. don′t operate with the sanitary cap on .Remove batteries when not in use for a long period of time 5. don′t disassemble the product, don′t use in a strong volatile , flammable corrosive or hot liquids (above 140 OF/60°C ) 6. Keep tube cover away from bottom of the container 7. Wash the inside of inlet by running water through after using liquid Other than water 8. Keep all parts of pump out of water except supply tube and cover. Make sure the AC is stable . Keep it away from children when the battery Is charging. 10 Pump noise .the pump motor maybe loud ,this is normal 11 It is normal that the water may flow from depth adjustment device during Operation 13.Do not use the pump for more than 8mins ,that will hurt the motor Directions for Use 1,For first time using ,please charge the battery for at least 12-14 hours and make sure the battery woke till exhausted 2,Remove the tube cover cap and attatch with fastener top bottle neck ,after adjusting with the bottle cap to height of containter. 3.Snap on the discharge hole on the frame of the pump 4.Push button and the water will flow ,push again to stop 5.When used for the first time ,let water run for 30 or 60 seconds to clean out pump