2.4G WiFi Signalverstärker

2.4G WiFi Signal booster This indoor signal booster can increase the effective range and coverage area of your Wi-Fi network. Ideal for use with 2.4 GHz frequency hopping or direct sequence spread spectrum radio modems and 11 mbps IEEE802.11b devices. Simply attach the booster in between the standard antenna on a wireless router or wireless access point and watch your range grow. The amplified wireless signal may even penetrate complex environments with many walls and obstacles. Save on wiring costs with this easy-to-build wireless infrastructure for home or business use. Operation Range: 2400-2500 MHz Operation Mode: Bi-directional, half-duplex, Auto-Switching via carrier sensing Frequency Response: ± 1dB over operation range Input Power: 6dBm (Min.)-20dBm (Max.)Output Power: 1000mW/30dBm nominal for 802.11b/11Mbps Connector: SMA Receptacle, 50 ohm Transmit Gain: 17dBm nominal Receiver Gain: 12dBm Receive Noise Figure: 3.5dBm nominal Operating Temperature: -30 to +50 degree Operating Humidity: Up to 95% relative humidity Material: Cast AluminumM-B06Feature: 1000Mw 2.4ghz Indoor BoosterFrequency Range2.4-2.5GhzMaximum output power1000mwStandardIEEE 802.11B/GOmni antenna2.15dbiReceiver Gain>12dbOutput Gain>17dbMaximum input power of Receive-30dbmMaximum input power of Launch20dbmSignal TypeDSSSConnectorSMA OR TNCSupported Protocols802.11B/N, ISM, BluetoothTR Switch Time<1μsecDC Supply VoltageDC6.0V (EU optional)LEDPower(green), Emission(red), Receive(orange)Operating Temperature-30 +50degree temperature