1kw 48V Wind-Controller

Product featuresSeries controllerVoltage regulationAutomatic detection of voltagePWM controlMultistage charging technologyCurrent compensated load disconnectionAutomatic load reconnectionTemperature compensationElectronic protection functionsOvercharge protectionDeep discharge protectionReverse polarity protection of load, module and batteryAutomatic electronic fuseShort circuit protection of load and moduleOvervoltage protection at module inputOpen circuit protection without batteryReverse current protection at nightWind-turbine auto brake and brake switch for manual operation Battery overvoltage shutdownwind controller full tech-data: Model No.SWC-10-24SWC-10-48Wind turbine power 1000 WSolar rated power 300 WRated Battery Voltage 24 V48 VWind-turbine input power max. 1500 WWind-turbine input current max. 60 A40 AOver-charge voltage 28.8 V58.8 VOver-charge recovery voltage 26 V56 VOver-discharge Voltage 21 V42.5 VOver-discharge recovery Voltage 23 V47 VMethod of control Two way control with PWM Free-load lost power ≤6 mAVoltage lost on charging ≤0.26VVoltage lost on discharge ≤0.15VDisplay * LCD show battery charging current; battery voltage; system operation status* LED show battery situation ;device working status Protection Mode Solar cells reverse charging, solar cells anti-reverse connection, battery over-charging, battery over-discharge, battery anti-reverse connection, over-load, Load anti-reverse connection, wind-turbine current limited, wind-turbine rotation limited, manual brake switch equipped. Over-load and short-circuit protection 1.25times 60sec./ 1.5times 5sec. actionambient temperature -25°C - +55°Chumidity <85% RH without condensationDimension 415mm x 345mm x 160mmDump-load Set inWeight 9 kgCooling Method Cooling Fan