150W Schaltnetzteil (S-150-Serie)

150W switch power supplyCompetitivedprice and high reliability105oC Output capacitor AC input power suitable for the world High efficiency and low operation temperature Soft-start current can reduce the AC input impact effeciticly With short-circuit and overload protection Compact size, light weight 100% full-load burn-in test Installed with EMI filter, minimum waveModelS-150-5S-150-7.5S-150-9S-150-12S-150-13.5S-150-15S-150-24S-150-27S-150-48DC output voltage3V7.5V9V12V13.5V15V24V27V48VOutput voltage range(Note:2)±2%±1%±1%±1%±1%±1%±1%±1%±1%Rated output current30A20A16.7A12.5A11.2A10A6.5A5.6A3.2AOutput current range0-30A0-20A0-16.7A0-12.5A0-11.2A0-10A0-6.5A0-5.6A0-3.2AWave and noise(Note:3)150mV150mV180mV180mV180mV180mV240mV240mV240mVInlet stability(Note:4)±0.5%±0.5%±0.3%±0.3%±0.3%±0.3%±0.2%±0.2%±0.2%Load stability(Note:5)±0.5%±0.5%±0.3%±0.3%±0.3%±0.3%±0.2%±0.2%±0.2%DC output power150W150W150.3W15W151.2W150W156W151.2W153.6WEfficiency70%80%80%82%83%84%85%86%87%Adjustable range for DC voltage4.5 5.5V46 8.3V8 10.4V10.6 13.2V12 15V13.5 16.5V21 28V24 30V43 53VInput current3.2A/115V 1.6A/230VAC inrush currentCold-start current 30A/115V 60A/230VLeakage current<3.5mA/240VACOverload protection115% 135%125% 145%115% 135%Temperature coefficient±0.03%/°c(0 50°c)Setup, rise , hold up time100ms,50ms, 20msVibration10 500Hz, 2G 10min,/1cycle, Period for 60min, Each axesWithstand voltageInput and output internal: 1.5KvAC, Input and enclosure:1.5KvAC, Output and enclosure:0.5KvACWorking temperature and humidity-10°c +60°c(Refer to output derating curve), 20% 90%RHWeight0.8KgsSafety standardsUL 1950, TUV EN60590 ApprovedEMC standardsCISPR22(EN55022), IEC1000-4-2,3,4,5 IEC1000-3-2 VerificationNote: 1. The testing condition for the paramenter above is: 230VAC input, rated load, 25°c 70% RH. Temperatuer. 2. Error: include the setting error, line stability and load stability.(Note:5) 3. Wave test: adopting "A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting. 4. Inlet woltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to 100%