13,3 "Touch-POS-Monitor

13.3" Touch POS Monitor name13.3" Touch POS MonitorPanel Size13.3 inchResolution1024X768Brightness350lmContrast ratio450:1Visual angleH150, V145Power input12Vpower consumption<20WInterface15-pin VGA Our factory is the specialized production POS monitor and the touchscreen monitor's factory. Product from 8 inches to 15 inch. Control key functions Description: 1. menu: osd activation key, enter or exit the osd 2.up /: Move the menu or to increase the value of a feature 3.down/ : down menus or reduce the value of a feature 4. power: the power switch 5. AUTO: Automatic adjustment Menu (OSD) function: Commonly used is 5 button operation, the role of each key as follows: <ON/ Off> / (POWER): Use this button to turn on or turn off the monitor. <Menu> / (MENU): Use this button to open the OSD menu, and activate the first since the top menu item. If you continue this button, then enter (that is to choose / pop) the activated menu item menu the next level. This operation has the circular. In addition, because this button is also equivalent to <Select> button, the Exit menu is also done by it. <Left> / (LEFT) or <->: Use this button to highlight a menu, the highlight left menu, or in a value (parameter) of some of the menu item used to reduce the value. <Right-> / (RIGHT) or <>: Use this button to highlight a menu, right menu, the highlight, or in a value (parameter) of some of the menu item used to increase value. "Unattended> / (AUTO): Use this button to automatically adjust the image position and phase. When the state of non-full screen images (such as in DOS mode) or receive a distributor, perhaps there will be automatically adjusted deviation from the image position, this time the need to enter the OSD menu to manually adjust the horizontal or vertical position and phase.