10kV SC (B) 11 Dreiphasen-Trockenleistung distribtio

Main Characteristics 1.Low no-load loss and energy conservation 2.Low noise and environmental protection 3.Long service lifetime and safe and reliable performance 4.Reasonable and aesthetic structural design and exquisite manufacture craftsmanship 5.A full variety of accessories and appropriate protection measures Normal Operation Conditions 1.Installation site: outdoors or indoors 2.Altitude: less than 1000M 3.Ambient temperature: -25oC +40oC 4.Maximum relative humidity: 95%(25oC) 5.Earthquake-resistant capability: the horizontal acceleration of ground surface is 0.3g, and thevertical acceleration of ground surface is 0.15g concurrently acting continuous three sine waves, safety factor ≥1.67 6.All-weather working capability in outdoor environment 7.The equipment has certain capability in dustproof, antifouling, waterproof, earthquake resistance and shock resistance Note: Transformers operating in special environment are available upon the demand of customers. Standard of Products GB1094.1-1996, GB1094.2-1996, GB1094.3-2003, GB1094.5-2008, GB1094.7-2008, GB/T6451-2008, JB/T10217-2000, etc Performance Parameter ListRatedcapacity(kVA)Voltage combination and tap rangeConnectionGroupNo-loadloss(W)75°C load loss(W)No-loadcurrent(%)Impedancevoltage(%)Highvoltage(kV)Tap(%)Lowvoltage(kV)3066.36.61010.511±5±2×2.50.4Yyn0Dyn111907102.104.05027010002.108037013801.6010040015701.6012547018501.5016054021301.5020062025301.3025072027601.3031588034701.1040098039901.10500116048801.106.3134058800.9630130059600.906.0800152069600.901000177081300.901250209096900.9016002450117300.9020003050144500.7025003600171700.7016002450129600.908.020003050159600.7025003600188900.70Note: Load loss values above the oblique line in the table are applicable to the Yyn0 connection group, and the values below the oblique line are applicable to the Dyn11 or Yzn11 connection group. Ordering Instructions Please provide the following parameters for placing an order: 1. Product model; 2. Rated capacity; 3. Voltage combination; 4. Regulation range; 5. Frequency; 6. Connection group symbol; 7.Technical requirements for special product.