10km 155M SFP Doppelfaser optische Transceivermodul

Features1. Dual data-rate of 155Mbps /100Mbps operation2.MQW FP Structure , 1310nm, PIN3. LVTTL logic level RX LOS 4.40km transmission with SMF5. Standard serial ID information compatible with SFP MSA6. SFP MSA package with duplex LC connector7. Very low EMI and excellent ESD protection8. +3.3V single power supply9. Operating case temperature:Applications1. Switch to Switch interface 2. Switched backplane applications Router/Server interfac ATM SONT/SDH/PDH FDDI Fiber Channel Other optical transmission systems Standard1. Compatible with SFP MSA2. Compatible with IEEE 802.3z3. Compatible with ANSI specifications for Fibre Channel4. Compatible with FCC 47 CFR Part 15, Class B5. Compatible with FDA 21 CFR 1040.10 and 1040.11, Class I6. Compatible with Telcordia GR-468-CORE RoHS complianceDescriptionThe SFP transceiver is high performance, cost effective module supporting dual data-rate of 155Mbps/100Mbps and from 10km to 20km transmission distance with SMF.The transceiver consists of two sections: The transmitter section incorporates a FP laser. And the receiver section consists of a PIN photodiode integrated with a trans-impedance preamplifier (TIA). All modules satisfy class I laser safety requirements.The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver.The standard serial ID information compatible with SFP MSA describes the transceiver's capabilities, standard interfaces, manufacturer and other information. The host equipment can access this information via the 2-wire serial CMOS EEPROMprotocol. For further information, please refer to SFP Multi-Source Agreement (MSA).The SFP transceivers are compatible with RoHS.