Ort der Herkunft |
Guangdong China (Mainland) |
Marke |
XDriver |
Modell-Nummer |
HPS-12100-XZ0000 |
Eingangsspannung |
110V |
Ausgangsspannung |
12VDC/24VDC |
Ausgangsstrom |
12V 8.5A |
Ausgangsleistung |
51 - 100W |
Ausgangstyp |
Einzel |
XDriver Waterproof 100W LED Power Supply is a universal device that operates on input voltage ranging from 90VAC 130VAC and 170VAC 250VAC and provides 8.5 amperes of filtered and regulated 12VDC power (nominal) to LED lighting fixtures, controllers or decoders etc. XDriver Waterproof 100W comes with a 1 meter (3. 3 feet) long power cord with American plug or European plug to suit different interface. It also has a 1 meter (3. 3 feet) long cable, which can directly attach to ATG Electronics products or via power adaptor board. XDriver Waterproof 100W is contained in an aluminum housing and rated as IP66 degree (applicable for dry, wet and damp environment). The mounting brackets at both ends of the power supply can enable customers to install it easily. Waterproof 100W is the ideal and cost effective solution for driving quantity of 12VDC LED lighting fixtures, controllers or decoders etc. It has successfully been installed with thousands of LED lighting systems in the world.Technical Specification:-Input Voltage: 90VAC 130VAC/170 VAC 250 VAC -Output Voltage: 12 VDC/24VDC -Dimension: L240 * W70 * H45 mm (L9.45 * W2.76* H1.77 inch) Featuresand Benefits of LED Power Supply: -Direct Assembly on DIN-Rail; -Enclosed and compact housing, weather resistant; -Overload Protection, Constant Current Limiting, Reset: Auto Recovery; -Short-Circuit Proof, 100% Full Load Burn-in Test; -Built-in EMI Filter, Low Ripple Noise; -Plug is available for North America, Europe etc; -Simple primary hook-ups, Class 2 outputs; -No minimum load, no load balancing and no dip switches; -Proven reliability at low cost.About us:Think Green, Act Green. ATG Electronics Corp., established in 1999 and formed partnerships with companies in California, designs, produces, distributes and licenses lighting emitting diode (LED) illumination and decoration lighting systems. ATG Electronics has a world class product research and development team; our production is carried out strictly with ISO9001-2000 quality management standards. ATG Electronics' products are CE, UL and RoHS certified and are in the top ranks among similar products in the international markets; ATG Electronics' world wide operation is managed through a customized ERP system and is highly efficient and transparent and therefore enables us to provide quick and high quality services to our clients. ATG Electronics aims to provide maximum value to our clients through our excellence in products, services and solutions.