100 MHz Dual-Trace-Oszilloskop

OS6100 oscilloscope CRT Type 6" rectangle, internalgraticule, 0%, 10%, 90% and 100% marks Display area 8 x10DIV (1DIV=10mm) Accelerating voltage 15kV Intensity and focusing Continuously adjustable at front panel Trace rotation Adjusted at the front panelVERTICAL SYSTEM Sensitivity and accuracy 5mV / DIV 5V / DIV ±5% 10 calibration steps in 1-2-5 sequenceTrimming Ratio ≥2.5:1 Width of band (-3dB) DC(AC 10Hz) 100MHz Rise time (5mV / DIV) Approx 3.5nsInput Coupling AC, DC, GND Input Impedance 1MΩ±5%,25pF±5pF Max. input voltage 400V (DC + ACpeak) at 1kHz or less Vertical Mode CH1, CH2, DUAL ( ALT/CHOP) ADD, CH2 INV HORIZONTAL SYSTEM Sweep time 50ns 0.2s / DIV 21 steps in 1-2-5 sequence Sweep accuracy ±5%, ±10% at x10MAG Trimming Ratio ≥2.5:1 Sweep magnificaton x10MAG Max sweep time 5ns/DIV Linear 5%, 10% at x10MAGALT-MAG Function Available ALT separation AvailableTRIGGER SYSTEMMode AUTO, NORM, TV, LEVEL LOCK Source ALT, CH1, CH2, EXT, LINE Polarity "+" or "-"Triggersensitivity AUTO Or NORM INT DC 50MHz: 1DIV, 50 100MHz: 2DIV EXT DC 50Mz: 0.3V, 50 100MHz: 0.5V TV sync pulse 2DIV or 0.5V (EXT)External trigger input Input impedance: 1MΩ±5%,25pF±5pF Max. input voltage: 400V (DC+ACpeak) at 1kHz X-Y OPERATION Sensitivity and Accuracy 5mV 5V/DIV, ±5% 10 calibration steps 1-2-5 sequence Width of band (-3dB) DC (AC 10Hz) 1MHz Phase difference ≤3° (DC 50KHz) Axis ZSensitivity 5Vp-p Polarity Negative going input increase intensity Input impedance 10kΩ Usable frequency range DC 1MHz Max. input voltage 50V (DC+AC peak) at 1kHz Calibration Voltage: 2Vp-p±2%, Frequency: 1kHz±2%, Square wave Power source 110 127 VAC±10%, 220 240VAC±10%, 50Hz±2Hz / 60Hz±2HzACCESSORIESInstruction manual x 1, Power cable x 1, Probe x 2 ,Fuse x1DIMENSIONS & WEIGHT 310(W) x 145(H) x 440(D)mm, Approx. 8kg