10 / 100M Media Converter

Media Converter/10/100m ethernet media converter/fiber converterProduct Introduction 10/100MFast Ethernet Media Converter, relies on its unique function ofoptical-electricity LFA (Link Failure Alert) to realize the extension of LANEthernet. Ethernet Media Converter achieves the interconversionof 10/100Base-TX UTP Cable electrical signal with 100Base-FX optic cable. Itextends the network transmission range from 100m, the limit of copper Cable, to120Km on fiber. It adopts Store and Forward mode or Cut-Through mode to realizethe data transmission between network connection media of optical fiber andelectricity. It supports optical transmission under dual-fiber multi-mode,dual-fiber single mode and single fiber single mode. MainFeatures: Auto-Negotiation (802.3u) for10/100Base-TX for network upgrade. Built in effective switching corefor flow control, reduce broadcast packet Support Full/half duplexself-adaptive transmission mode and auto-negotiations Support Automatically detecting andconfiguring the twisted pair port on the converter to the correct MDI or MDI-XConfiguration, convenient for system debug and installation Support Link Failure Alert (LFA) ,Allows for quick diagnosis and resolution of network problems Support full/half duplex operationfor each TP switched port Support 10/100Mbps Store andForward mode or Cut-Through mode operation Optical interface supports100Base-FX, and fixed 100Mbps full duplex operation Support low delay transmission Support 1600 bytes for Cut-Throughmode Support 802.1Q VLAN tagged packetstransmission Support QoS, ensure VOIP datapackage transmission Ultra low power dissipation(<2W), low heat generation , enabledsteady operation over a long time Support the port choice ofdual-fiber multi-mode, dual-fiber singlemode and single fiber single mode, which expands the customers requirements Technical indicators: Parameters Specification Access mode 10/100Mbps Standard IEEE802.3 10Base-TEthernet,IEEE802.3u,100Base-TX/FX Fast Ethernet, IEEE802.3x Flow control Wavelength 850nm/1310nm/1550nm Transmissionrange Dual-fiber multi-mode :2Km, Dual-fibersingle mode :20/40/60/80/100/120Km, singlefiber single mode :20/40/60/80/100Km CAT 5 UTPcable:100m FX and TXPorts 1 RJ45 connector: connect STP/UTPCAT 5 twisted pair 1 opticalinterface: multi-modeSC or ST opticalinterface (fiber size 50,62.5/125μm) Single modeSC/FC optical interface (fiber size 9/125μm) Singlefiber single mode SC/FC optical interface (fiber size 9/125μm) Conversionmode Store and Forward mode orCut-Through mode Buffer size Built in 128Kb RAM for data buffer Flowcontrol Full duplex: flow control,half-duplex Bit errorrate: <10-9 MTBF 100 thousand hours. LEDindicator lamp POWER(power supply),FX LINK/ACT(optical fiber connected/action) FDX(FX fullduplex ), TX LINK/ACT(twisted pair connected/action) TX 100(twisted pair 100M transmission rate), FX 100(optical fiber 100M transmissionrate) POWER Power adapter: input: AC 90 264V /DC100 380V output:DC5V 1A powerconsumption <2W Operatingtemperature -10 55 Workinghumidity 5% 90% Storagetemperature -40 70 Storagetemperature 5% 90% no condensation Dimensions: Outside power supply:94mmX71mmX26mm