10 / 100M Ethernet Fiber Media Converter

10/100M Ethernet Fiber Media Converter Key Specifications/Special Features: Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-Tx and 100Base-Fx standards With one SC fiber connector and one 10/100Mbps RJ45 port Auto-detection of half/full duplex transfer mode for Tx port Auto-negotiation of 10/100Mbps rate and auto MDI/MDIX for Tx port Providing switch configuration of half/full duplex transfer mode for FX port Extend fiber distance up to 2km with multi-mode fiber Easy-to-view LED indicators provide status to monitor network activity easily External power supply (5V DC 1A) Network cable supported: Connection mode: RJ45-SC Transmission distance: 2km Transmission media: multi-mode fiber, Cat.5 Output center wavelength: 1,310nmEnvironment: Operating temperature: 0 to 40°C Storage temperature: -40 to 70°C Operating humidity: 10 to 90% non-condensing Storage humidity: 5 to 95% non-condensing LED indicator lamp Status Explanation FX Link/Act On Connection status display for fiber link. ON indicates that Fiber link is in correct connection. Blink Active status display of fiber link Blink indicates packet goes through Fx end. TX Link/Act On Connection status display for electric link. ON indicates that electric link is in correct connection. Blink Active status display of fiber link Blink indicates packet goes through Tx end. FDX On Transceiver works in the full duplex mode. Off Transceiver works in the half duplex mode. PWR On Power is on and normal. FX On Transfer rate of optical interface is 100Mbps. TX On Transfer rate of electric interface is 100Mbps. Off Rate of electric interface is 10Mbps