+ 3D-Achsvermessung CE / Werkstattausrüstung

3D Wheel Alignment CE/ garage equipment Features:1. 3D cameras alignment based on the car and not influenced by the platform.2. Measurement system equipped with double digital cameras and four target disk, supplying revolutionary measurement mode.3. There is no electronic component, so the wheel alignment will not have a component failure problem.4. Equipment Calibration - once calibration before delivery, workable immediately after installation, no need for periodic calibration5. Measurement progress no need to compensate for steel ring, the precise eccentric compensation will be just once pulling or pushing the car back and forth6. Software system Easy to operate, complete conventional basic parameters within two minutes, significantly faster than conventional aligners7. Easily maintenance, download and upgrade freely for the model dataModel: SX-G7Measurement project AccuracyMeasurement rangeDisplay accuracy1´/1mmCamber±2´±10°Caster±6´±20°Kingpin Inclination±6´±20°Toe-in & Toe-out±2´±20°Set back±2´±5°Thrust angle±2´±5°Wheel Deviation±2mmAxis Deviation±2mm Basic Functions:Parameters such as camber, Caster, Kingpin inclination, Toe-in & Toe-out 1. Axis deviation measurement 2. Wheel deviation measurement 3. single-round measurements 4. the vehicle lift measurement function 5. steering wheel adjustment 6. check the horizontal of the lifting platform Extention functions: 1. Toecurvechange 2. Enginesupportbracketadjustment