(2) E3JK-5M1-N 2M Integrierte Stromversorgung Photoelectr

E3JK-5M1-N 2MBuilt-in Power Supply Photoelectric Sensor DATA SHEET Sensing methodThrough-beamSensing distance0 m to 15 mStandard sensing objectOpaque: 12 mm dia. Min.Directional angleEmitter:3 to 15 DEG Receiver:3 to 15 DEGLight sourceInfrared LED (870nm)Power supply voltage12 to 24 VDC -10% to 10% (ripple(p-p) :10% Max.)Current consumptionEmitter: 15mA DC Max., Receiver: 20mA DC Max.Control output (Output type)PNP open collector outputControl output (Load current)0 to 100 mAControl output (Residual voltage)(DC) 1 V Max. (Load current: Less than 10mA) (DC) 2 V Max. (Load current: 10 to 100 mA)Operation modeLight-ON/Dark-ON selectableLoad power supply voltage26.4 VDC Max.Protective circuitSurge suppressor Output short-cut protection Output reverce polarity protection Power supply reverce polarity protectionResponse time1 ms Max.Sensitivity settingSingle-turn adjustmentAmbient illuminanceIncandescent lamp:3000 lux Max., Sunlight:10000 lux Max.Ambient temperatureOperating: -25 to 55 CEL Storage: -40 to 70 CEL (with no icing or condensation)Ambient humidityOperating: 35 to 85 %RH Storage: 35 to 95 %RH (with no condensation)Insulation resistance20 M OHM Min. at 500 VDC between charged parts and the caseDielectric strength1000 VAC at 50/60 Hz for 1 minute between charged parts and the caseVibration resistance10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directionsShock resistance500m/s2 for 3 times each in X, Y, and Z directionsDegree of protectionIEC60529: IP67Applicable standard (EC Directive (Low Voltage Directive))EN60947-5-2Applicable standard (EC Directive (EMC Directive))EMI: EN60947-5-2 Emission Enclosure: EN55011 Group 1 classA EMS: EN60947-5-2 Immunity ESD: IEC61000-4-2 Immunity RF-interference: IEC61000-4-3 Immunity Burst: IEC61000-4-4 CE marking: EquippedConnection methodPre-wired models (Cable length: 0.5 m)IndicatorOperation indicator(orange), Stability indicator(green), Power indicator(orange)Weight (packed state)approx. 55 gTightening torque0.5 N.m Max. (with M3 screw)Material (case)PBTMaterial (lens)Denatured polyarylateAccessoriesInstruction manual