ZJS-601 water-based laminating adhesive

Our water emulsion adhesive developed, using water as binder carrier, non-toxic, no solvent evaporation in production, no irritating smell. Atmospheric pollution on the work and the use of tools and equipment after the water can be cleaned .Is a non-polluting, energy-efficient environment-friendly energy-saving products. Operation points 1, In the other process parameters unchanged, the higher the viscosity of adhesive, coating the greater the amount, whereas the smaller amount of coating. 2, Relative substrate coated roller speed run higher coating weight, the more low coating weight smaller. 3, The gravure roll coating method, gravure roller blade on the pressure the greater the smaller the amount of coating. Anti-vice versa. The reverse roll coating method, extrusion coating roll roll and roll away from the smaller, the smaller amount of coating, roll away from the larger, higher coating weight. 4, Needs special machinery and equipment and is suitable for laminating rolls, and then 0.5 --- 2 hours before being cut after curing transparent Product Specifications Appearance milky white viscous liquid 2) Solid content ≥ 50% 3) viscosity of 3400 ± 250 (mpa.s) 4) adhesive paper and plastic will be separated, the ink adhesion on plastic thin side. 5) the bonding temperature is 20 °C -60 °C Packaging and storage: Storage period: 12 months; Packing :25-50kg plastic drum; Storage conditions: 40 °C below;