自动大门隔离墙

Description 1) Automatic Gate Barrier 2)This Automatic Gate Barrier provides closing/opening time: 1/1.5 sec. optional 3) Straight boom arm with rubber bar, Max.length following: 2.5m for1 sec. 3m for1.5 sec. 4) This Automatic Gate Barrier is equiped withLED light bar on its boom arm 5) W/o remoter, w/o boom bracket,w/o anti-collision: need to buy these three additionally 6) Optionalcase color as yellow (default)/orange/white/red/blue 7) This Automatic Gate Barrier providesoptional boom arm direction asleftward/rightward Features 1. Anti-collision mechanism protects boom arm (optional) Anti-collision protects the boom arm not to be damaged once arm was collided by a vehicle. 2. Self-adjust operation smoothness of boom arm Self-adjusting the operation smoothness of the boom arm, and saving optimal point, it optimizes the working status of the motor and mechanical structure so that their lifetime will be prolonged. 3. Heavy-duty and simple-design cabinet The cabinet adopts 2mm precise machining cold-rolled plate and static electricity sprayed anti-UV surface which is non-scale and unfading, conformed to the IP54 dustproof and waterproof. Simple design also decorates your premises. 4. Boom to open up fully or close down in case of power failure If power is suddenly off while boom closing, boom will automatically close down fully if the angle between boom and vertical plane beyond 45 degree. Same to opening. 5. Sine lever drive mechanism ensures smooth landing of boom without shaking The patented precise casting Sine lever drive mechanism enables the boom arm moves from slow to fast when it starts, and fast to slow when it stops. This will effectively reduce the shaking of the boom arm and allay the burden of the electrical motor, so that the lifetime of the motor and mechanical components will be greatly prolonged. 6. Maintenance-free 70W torque motor 100% duty cycle The 70W integrated decelerating torque motor is environmentally friendly, energy-saving, and maintenance-free. No current shock and overheating while working, it protects the controller and prolong its lifetime. Also it is 100% duty cycle. 7. Anti-hit ---Prior to opening If a vehicle is coming while boom arm moving down, the boom arm will immediately go back to vertical position once loop detector is trigged by the vehicle or manual commands is given by guard, which protect the vehicle not to be hit by boom arm. 8. Anti-hit---Rebound in case of pressure resistance While moving down, boom arm will immediately go back to vertical position once it is obstructed by an imposed force, which protects the vehicle or person not to be hit by boom arm. The sensitivity is adjustable. 9.Anti-hit----Infra Red (optional) While moving down after vehicle passed, boom arm will immediately go back to vertical position once the IR transmission between the receiver and transmitter was blocked by a vehicle or person, which protects the vehicle or person not to be hit by boom arm. 10.Optional controlling way There are three ways to control the barrier’s movement, namely, external button, remote-control and RS485 serial command. 11. Always-open mode If ‘open’ command keep working (by continuously pressing “open“ button) or RS485 command was set at always-open mode, the barrier will ignore all ‘close’ command and stay at the vertical position , unless the status changed. 12.Automatically error self-check & report 13. Manual control in case of no power 14. Anti-condensation in cold climate Specifications 1) Power: AC 220-240V,50/60HZ, Max.0.5A 2) Motor: 70W concreted decelerating torque motor 3) Controller: Intel 80C51 MCU, 40 MHz,controlled silicon motor control 4) Spring: multi-spring balance 5) Loop detector input: pulse width 100>ms Infrared detector input: pulse width 100>ms Up & Down input: pulse width 100>ms 6) Traffic light output: relay output, max. current 1A 7) Loop detector Syn. output: relay NO output, AC220V/0.5A, DV 12V/1A 8) Wireless remoter(optional): two button remote transmitter, distance>20m 9) RS 485 interface: 9600bps, ASCII decimal encoded 10) Arm:45×100mm Aluminum alloy 11) Housing: 2mm cold-roller sheet, IP 54 level Housing dimension: 330mm×345mm×950mm 12) Weight: around 60 KG 13) Operating temperature: -25°c -55°c; Humidity:10%-95% ApplicationsThis automatic gate barrier provides a secure and convenient solution of stopping unauthorized vehicle or giving access to authorized vehicleon toll gate, or parking lots with high traffic flow such as shopping center, exhibition center, hospitals, airports etc. Ask us for Catalogueand pricelist covers all models with different boom arm shape(straight/crank/fence),boom arm length(Max.6m) and opening / closing time (1/1.5/2/3/4 sec.)