自动传输系统

Brief Introduction of product: The testing platform based on the original automatic transmission which can run from step motor , It can be finish automatic transmission by displaying gear range, neutral starting,direct and reversing the gear running, It displays framework and work process of the automatic transmission Needs for teaching and service of engine theory and automatic transmission . It is fit for teaching requirement and service of junior and senior vocational schools, lerberal education schools and training institutions in Automatic transmission system teaching. The platform is easy and safe to operate with various functions.Contain of structure:Automatic transmission compartment,TCM,shift lever compartment,transmission fluid radiator device,combination instrument,step motor,Frequency Converter,throttle body compartment,crankshaft position sensor and signal pulley,date link connector,pressure indicator,setting malfunction of intelligent,move platform and so on. Character:1. It is installed with original automatic transmission run by step motor. It displays framework and work process of the automatic transmission by displaying and neutral starting, direct the gear and reverse the gear of running2. on the panel of the running stage there was painted the circuit diagram with the same color of the real transmission and the diagram is protected by methacrylate and inlayed with aluminum. The learner can compare the diagram and the real transmission to know and analyze the working theory of the system.3. The testing platform is installed with testing Terminal, to test signals of sensor, actuator and engine controlling unit, e.g: resistance, voltage, current ,frequency signals.4. The panel of testing platform is installed with combination meter; fuel Pressure Gauge, vacuum Pressure Gauge which displays the change of engine rotating speed, vehicle speed, the gear of automatic transmission, oil pressure of main and so on.5. Testing platform is installed with date link connector which can be connected with decoder of auto for special or common use. The platform can read and clear our fault code, read data stream, and other function of self-diagnosis of automatic transmission.6. There is instruction light on the panel detecting working status of all electromagnetism valves. 7. The testing platform is equipped with chief switch, the shield of electric engine and output shaft8. The base of the testing platform was sealed by steel framework, with plastic painted on the surface. It is very flexible with truckle equipment9. (Collocated) The platform was collocated with setting of intelligent faults, as the characteristics below:A.It adopted the latest MCU technology, digital integrated circuits, with Color Liquid Crystal Display of 320*420 and it is easy to operate. B.It can set faults of cutting off the connection of any open circuit, line-to-ground short circuit and other faults in any point freely.C.It can adjust setting of quantity and type of faults points according to usage requirement of the equipment.D.Installed with communication port, and can be connected to computer to ensure to finish setting up faults and parameter and eliminating faults by using this software.E.Installed with network port and can be connected with other faults setting equipment to form a network. The main controlling machine will control the functions of faults setting, fault solving, parameter setting, remoter start, information feedback and assessmentF.it is easy and convenient to update the software anytime to the latest version.technique parameter:Figuration dimension :1600 mm*1000mm*1800mm (length*height*width)Driving power:380V alternative currentInput power:220V alternative currentWorking power:12Vdirect currentWeight: 100Kgworking temperature-4050maintain time interval 60days