注射器里是c型的

Overview This product is a veterinary syringe for animals’ small dose injecting treatment. Especially be suit for epidemic prevention for small animal, poultry and livestock. 1. The structure is precession and the fluid absorption is perfect 2. The measurement is accurate 3. The design is reasonable and it is easy to use 4. It is easy to operate and the hand feel is comfortable 5. The body can be boiled disinfection 6. This product is equipped with spare parts Main performance 1. Spec: 1ml 2. Measurement accuracy: full size difference is no more than ±5% 3. The dose of injecting and drenching: continuous adjustable from 0.1ml to 1ml Operating method: 1. It should be cleaning and boiling disinfection before to use it. The needle tube should be exited from the piston. High-pressure steam sterilization is strictly prohibited. 2. It should be checked before use to ensure that each part is installed correctly and tighten the connecting thread 3. Dose measurement: Release the does fixed nut (NO.16) and rotate the adjusting sheath (NO.19 to the required dose value, then tighten the dose fix nut (NO.16) 4. Injection: First, connect the fluid-suction duct (NO.1) with joint (NO.2) and fluid-suction long needle. Second, put the fluid-suction tube and the gas tube on the rubber cap of the liquid bottle. Third, push and pull the handle (NO.18) to remove the air until you have got the required liquid. 5. If it can’t suck the liquid, please check the syringe that all part components are not damaged, the installment is correct, the connecting thread is tightened. Ensure that the spool valve is clearly. 6. It should be removing, drying cleaning and put into the box after using. 7. If it can’t suck the liquid, please check the syringe as follows: a. Check all part components are not damaged, the installment is correct, the connecting thread is tightened. Ensure that the spool value is clearly. b. If it is still can’t suck the liquid after you operate as the above, you may do like this: Sucking a mount of liquid in 6:100 joint parts, then push and pull the handle (NO.18) until the liquid is sucked.