中校车喷布斯

the spray booth: ModelGL8External size (m)8.7x5.63x4.23Internal size (m)8.6x4.0x3.4Entrance Width(m)3Entrance Height(m)23.35Fan capacity(m3/h)35000Air velocity (m/s)0.25-0.3Power (kw)13Vehicle suitedMiddle sized bus --wall panel: sandwich style, g=50mm, polystyrene,rock wool available as required. --basement: steel structure, 3 rows of vein board and 2 rows of grids, full grids as optional. --Door: 3 pcs of front door without aluminum side cover. 1pc of emergency door with pressure lock. --basement: steel structure, 3 rows of vein board and 2 rows of grids, full grids as optional. --ramp: 2 pcs vein board -- one 11kw intake fan -- 5m straight exhaust ducts, one 90° bend, and one 60° bend.5m straight chimney and 2 small bends. --Damper changer of painting and drying: changed automatically with cylinder-link driving. --heat exchanger: stainless steel. Riello/ G20S burner. --roof filter: 5 pcs of filter, mounted above support frame, which is made of steel and powder coated. --2 pcs of floor filter and 1 pcs of outlet filter. --upper light: 12 sets, 4*40w per set. --control box: imported components, overload, overheat, phase-lacking, phase-locking protection, engine Y/ start. . --automatically stop when preset time is up. --constant temperature spraying.