园艺舵

Cultivator Overall dimension Length mm 1520 Width mm 575 Height mm 970 Structure weight kg 74 Plowing width cm 50 Plowing depth cm ≥8.0 Productivity of per meter width per hour hm²/hm ≥0.1 Fuel consumption rate kg/hm² ≤12 Driving mode V belt Blade shaft Designed rotating speed r/min Low 247 High 412 Maximum radius of gyration mm 165 Total installed blades (pieces) 18 Rotary blade model K50 Ditching blade Overall dimension Length mm 1520 Width mm 575 Height mm 970 Structure weight kg 86 Opened trench depth cm 10-30 Trench digger’s width cm Top 18-30 Bottom 10-40 Working speed m/s ≥0.15 Connection Direct connection Drive mode Chain transmission Blade shaft Designed rotating speed r/min Low 399 High 662 Maximum radius of gyration mm 165 Total installed blades (pieces) 10 Ditching blade model K90 Hill-up blade Overall dimension Length mm 1520 Width mm 575 Height mm 970 Structure weight kg 83 Hill-up height cm ≥26 Hill-up digger’s width cm 14 Working speed m/s ≥0.15 Connection Direct connection Drive mode Chain transmission Blade shaft Designed rotating speed r/min Low 399 high 662 Maximum radius of gyration mm 165 Total installed knives (pieces) 8 Hill-up blade model K175 As a gardening tiller, it is multi-functional and very easy to operate. WorkInstallation and operationRotary tillage(1) Take the two front rubber wheels down and install the right and left rotary blade respectively; (2) Install the back tail and retaining lever; (3) Start the engine; (4) The retaining lever is to control the cultivating depth. If you want it to cultivate deeper, you can press the handles downward; if you want it to cultivate shallower, you can elevate the handles. Ditching(1) Tear the back tail apart and install hill-up gearbox; (2) Install ditching blade; (3) Pick the rubber wheels off and install the ditching iron wheel; (4) Rotate the handle 180 degree; (5) You may increase ditching depth gradually or ditch it several times until it complies with the requirements. Hilling up(1)Tear the back tail apart and install the gearbox; (2) Install hill-up blade; (3) Pick the rubber wheel off, and change hill-up compaction wheels; (4) Rotate the handles 180 degree; (5) You may increase the hill-up height gradually, or adjust the mudguard or hill it up several times until it complies with the requirements.