婴儿尿布机

JWC-NK500-SV baby diaper making machine PARAMETER OF EQUIPMENT FUNCTION 1.Designed speed 220m/min 2.Working speed 450pcs/minSmall size 3. Qualified rate 97 % The rate is compared with qualified products with gross output products within7.5 hours 4.Efficiency ≥85 The rate is compared real output with principle output within 7.5 hours 5. Installed capacity 345KW (Including hot melt system) 6.Electric power supply : Three-phase & four-wire 380V/50HZ(Ground wire) 7.Lowest barometric pressure :8kg/cm2 8.Gross weight 70000kg 9.Noise 85dBA 10.Outer size 25M×1.95M×2.2M 11.Color Silver 12.Range of products XL L M S 13.Length of products: 540mmXL 500mm(L) 450mm(M) 390mm(S) Features: 1) Sawmill crushing machine can crush untreated pulp, half-treated pulp and treated pulp. Pulp feeding is controlled by convertible frequency 2) Upper sanitary paper supplied, center auto-unwinding, constant tension control and automatic feeding 3) Cotton core formed by double net wheels 4) SAP adding device and quantity can be adjusted. Controlled by convertible frequency 5) Knurling and compacting core device are provided 6) Down sanitary paper supplied by cutting and transferring, constant tension control, center auto-unwinding and automatic feeding 7) Cotton core is cut down 8) Standing cuff, constant tension control auto-wind and automatic feeding, deviation rectifying guide 9) Back sheet film supplied, center auto-unwinding, constant tension control and automatic feeding, deviation rectifying guide 10) Frontal waist tape supplied, shut down and transferring 11) Elastic supplied and auto-unwinding 12) Surface absorbing cotton core, back sheet compound and compacted 13) End and side sealed by hot pressure 14) Side elastic embossing 15) Right and left elastic band supplied, center auto-unwinding, constant tension control and automatic feeding 16) Elastic right and left band embossing 17) Right and left waist tape supplied, cut down and transferring 18) Right and left elastic band cut down and transferring 19) Products are folded longitudinally and compacted 20) Products are cut finally 21) Products are rejected automatically 22) Products are tri-folded 23) Products are output 24) Driving system 25) Pneumatic system 26) PLC controlling system 27) Touchable screen