医生58k标是推软标签

Our Label Rolls provides adequate detection and very high deactivation performance. Low-priceAM labels are available in a wide range of standard and custom styles and are available in sheets and rolls to accommodate retailers with source-tagging and other in-store product protection requirements. VAR (Value Added Reseller) solutions offer the perfect complement for a variety of retail applications from food to specialty designer tags for soft goods protection White/Barcode/Black/Printing 1. Specifications Frequency: 58KHz 2. Dimensions: Length: 45mm+/- 0.2mm Width: 10.8mm+/- 0.2mm Label thickness (excluding liner): Maximum 1.8mm Label thickness (including liner): Maximum 1.9mm 3. Material ofConstrustion plastic housing amorphous alloy ribbon diaphragm Bias laminate Adhesive Release liner 4.Packing details: 1000PCS/Roll,20rolls/carton or customized inner diameter: 84mm liningmaterial: 4mm cardboard magnetic acoustic resonator(s) : Proprietary resonant magnetic material. Amorphous alloy based on iron, and containing nickel, boron and molybdenum. Laminate : Low Density Polyethylene / Polyester / Polyethylene 0.12mm (0.0047") Bias : Proprietary semi-hard magnetic material containing iron, and carbon. Laminate : Low Density Polyethylene/Polyester 0.08mm (0.003") Adhesive : Double-coated rubber-based adhesive Minimum peel strength of 60 oz./in. release liner : Double-sided, silicon-coated Kraft liner 0.12mm (0.005) thick Environmental Constraints Shelf Life Two year from date of manufacture when Labels are stored between 15-32 (60°F -90°F) and 30-80% RH. Temperature Maximum storage temperature not to exceed 50 (120°F) for 96 hours at 80% RH. humidity Unaffected by 80% humidity at 50 (120°F), up to 96 hours Pressure. Maximum at room temperature=445N (100lbs) when evenly distributed over the Surface of the label. External Magnetic Field Not to exceed 5Gauss at label. Usage Instructions Place in least conspicuous location. Do not cover warnings, expiration dates or important consumer information. Label placement should be in accordance with Source Tagging Guidelines. It is recommended that the surface to which the label is applied be clear and free of all dirt, grease, oil, etc. Ambient magnetic field of labeled product greater than 100mG may result in reduced label performance. Label not to exceed temporary magnetic field exposure greater than 6 Gauss. Individual analysis recommend for placement on metal products Operating Distance (cm) : mono 90-120 one side (sensormatic am system)