一般的水面浮标的支持

Evergreen General Surface Support Resilient Foam Buoys are manufactured from a polyethylene or EVA thermo-laminated foam core encapsulated within self-colored polyurethane out skin. Used extensively in single point mooring (SPM) systems, the three main types of support buoy are: Cylindrical Buoys, Chain-Throught Buoys, Pick-Up Buoys.Construction Features: lCore The core is manufactured by batching up the resilient closed cell polyethylene or EVA foam and uniformly and continuously thermolaminating each layer together. The method ensures a bond stronger than the foam itself and eliminates the use of adhesives which can break down under long use. Useing of a polyethylene foam core ensure the buoy will not absorb water even if the skin is punctured, increasing the lifespan of the product and reducing maintenance costs. The resilient material makes the buys self fendering with a high impact absorption capacity. lSkin The core is encapsulated with a skin of high performance polyurethane elastomer, spray applied. Polyurethane elastomer is selected for the skin because of its high resistance to abrasion, fatigue and ultra violet degradation and is significantly more durable than polyethylene materials used in the construction of rotationally moulded buoys. lSteelwok and end assembly Comprising through central steel tube with longitudinal gussets and external load distribution flanges at each end. A swivel assembly, certified 10 tonnes SWL, with bows at each end passes through the central tube. All the material of swivel assembly are hot dip galvanized. Steelwork to be coal tar epoxy painted.Material: Swivel assembly: bows to BS970 Gusets, flanges carbon steel to BS EN10025 Fe 430 A or B Central tube to BS 6323 Pt 3 HFS 5 Finish: Swivel assembly hot dip galvanized to BS 729 Zn2/Zn4 at 610 g/m2 Steelwok to be coal tar epoxy painted Skin Colour: Orange, Yellow and others