压缩的热量再生的能烘干机里

Capacity:10.7 212 Nm3/min Dew point temperature: -20oC Regenerative:Compression heat Air inlet pressure: 0.7MPa Air inlet temperature: 120oC Cooling water pressure: 0.2 0.6MPa Cooling water temperature: 2 34oC Follow the criterion of ISO9001 GB150 QS and pressure vessel inspection standard to manufacture strictly in order to make sure the product safetyhigh-efficiencycredibility to operate in long term. Regeneration air volume just need 2% of capacity perfectly utilizing compression heat to save energy and environment protection. Heat recovering device adopts the patent of entirely converse heat recovery to maximum utilize compression heat. Higher temperature is good for adsorption regeneration and save energy. The control panel of microcomputer(optional) of E-CTRL in Jenn-dong is a real time operating system based on the advanced microprocessor. It is controlled and monitored by concise user interface. User can identify the malfunction at the first time to make sure the sensitive location. At the same time, E-CTRL also collocates remote control port and joint control port to satisfy the special request by user. Pneumatic valve and control valve adopt international excellent brand and match special design of fueling system and oil recovery system. Which can prolong service life stability ,and also accord with the concept of environment protection by Jenn-dong. Valve switch is controlled by microcomputer program controller with performance stability to make sure no expire phenomenon when switching adsorption tower and avoid impact to sorbent by air flow. It could prolong service life of sorbent. Our product also accept custom-made with special request(Capacity is large 212Nm3/minspecial material-40oC -70oC dew point temperaturehigh pressure more than 0.98MPa special control, and so on.