新独立的红外传感器警报SC-60A

Description:1.This alarm is a wireless double infrared reaction product.2.Adopting special infrared processing integrated circuit and automatic temperature compensation technology.3.The device doesn’t detect the altering signals in 20seconds,after automatic defense-deploying is initiated, so please leave the detected area within this period.4.The device will give alarm for 30 seconds once it detects anybody entering the detected area. After the alarm stops ringing for 5 seconds, the infrared detector will automatically reset and go into detection again.5.With emergency power supply, floating charge device and low battery alarm function.6.The wireless PIR motion detector is an input device,The PIR motion detector alarm is designed to provide detection of criminal instruction through door frame and window frame into a protucted area by sensing infrared energy (heat) emitting from intruder body moving through a protected area. Upon detector of instruction the PIR automatically generate an alarm signal threaten the intruder. 7.It is can be wall mounted by means of a bracket.As a result of Low false-alarm rate ,High anti-interference capability,Long emission distance. Independently alarm.suitable for home,office,garden,street stores and other places need anti-theft alarm.Technical paraments:Power:6V DC/(4pieces 7battery/DC9-12V) Siren sound level: ≥80dB Standby current: ≤100uA Alarm current ≤150mA Infrarde angle: 110°(RL) Dececting distance: 7-12meters Usage: 1. Turn on the power switch”ON”, the host, "drop" a sound that the normal. 2. The alarm signal is not detected after 20 seconds, you must leave within 20 seconds in the detection area of electronic dog. 3. After 20 seconds someone into electronic dog if the detection area, the electronic dotg will issue alarm sounds for 30 seconds. after the alarm sounds abour 5 seconds, if there are personnel touch electronic dog, it will alarm again, again and again. 4. Electronic dog alarm, you can turn off the power switch, the end of alarm.This alarm is wireless reaction products,when some in the rang of it is reaction,it would be send out alarm sound.protect your property. Installation requirements: 1.Infrared detector (E-dog) in the human lateral movement relative to the sensitivity of the lens,The highest, while the sensitivity of longitudinal movement relative badly, so installation should pay attention to height and location(about 2meters) 2.E-dog on the scope of protection should be able to look directly, can not have obstacles. 3.Installation should be avoided near the heat source, such as hot and cold air outlet, air-conditioning outlet, electric heating,also avoid the straight on the doors and windows. 4. E-dog into the wall should be 10 to 30 degrees angle, then detection distances, the actual installation to adjust the installation angle under. 6. Open the battery cover, inside the battery compartment in accordance with the identity of the four load cell. 7. Fixed in the universal electronic dog seat, turning e-dog, to meet the installation requirements and needs can be detected. 1pcs/box size:10.2*5.5*5.5cm(L*W*H) 200pcs/Carton