纤维分离器（低俗策机)

Application Fiber separator is used not only for defibering, but also for removing all kinds of impurities of waste papers with the different specific gravity of fibers, it combines defibering, separating and screening in one unit. As secondary pulping and separating, it is normally located after the hydraulic pulper. Fiber separator can handle with coarse screen rejects too. Structure features Fiber separator consists of a conical housing, horizontal-separating impeller, drive, reject discharging unit, etc. The stock enters the upper part of housing tangentially. The impeller work as pump and defibering knife, but also generate turbulence to flush the screen holes. Accepts pass through the screen plate, which is behind the impeller, and discharge under pressure. The lightweight impurities (such as plastics) collected in the center under the vortex effect will be discharged with a part of stock from the central outlet on the front cover at regular intervals. Under the gravity effect, the heavy impurities will go down along the conical housing, pass through a short helix channel and discharge at the lower reject outlet. Three fundamental function: secondary defibering, separating lightweight impurities, and removing heavy impurities. With the defibrater in the pulping process, its possible to use the poor waste paper, reduce the pretreatment of the raw material and save the cost. Its possible to increase the production of existing hydraulic pulper, reduce the specific energy consumption by about 10 20%. Its possible to obtain high quality stock and reduce fiber loss. With the defibrater in the screen process, its possible to increase screen efficiency and save the cost. Main technical date Model (t/24h) Capacity (mm) Diameter of impeller (mm) Screen hole size (%) Inlet consistency (MPa) Inlet pressure (KW) Power ZDF0 5 10 Φ300 Φ2.5 Φ5 2.5 4.5 0.2 0.3 18.5 ZDF1 15 20 Φ355 30 ZDF2 30 40 Φ450 45 ZDF3 60 80 Φ610 75 ZDF3A 90 100 Φ880 75 ZDF3B 150 180 Φ910 75 ZDF4 100 130 Φ960 132 ZDF4A 140 170 Φ960 160 ZDF5 200 240 Φ1150 200