线倒/电线连接

After years of research, we have developed and patented our very own Z - Connectors. Our slogan is: "Just adjust and tighten, and you are THROUGH"! Z - Connectors uses are similar to Gripple products, however we use different mechanisms inside; it is a connector, joiner, splice, and tensioner for use on all types of wires and cables in the fencing. it eliminates the need for stretchers, ratchets, crimps, crimping tools, wire splices, and tying wire by hand. it operates like a Chinese finger trap with one-way locking channels. the wire / cablepasses through thewire connector in one direction, then ceramic rollers and steel springs lock the wire and prevent it from going back the other way. toprevent rust and corrosion on the exterior, theoutside shellis composed of a zinc-aluminum alloy. Internally, ceramic rollers are used to combat rust and corrosion. The application of Wire Vises with Loops: to go over the end posts. We have our very own R&D and Mould departments, and regularly make small adjustments on Z-Connectors based on customers’ wire / cable samples. We recently have just adjusted Z-Connector 5062V series based on 1/8 inch CABLES from a large US customer. The initial trial by the customer proved that new 5062V Z-Connectors were able to hold the cable without slipping for weights up to 1700 lbs. The cable broke before it slipped for all tests. The entire Z-Connector series have also been certified by SGS to be able to hold wires / cables without having it slipped for weights up to 1300 lbs - 1700 lbs depending on the sizes. We would love to hear from your specific applications, and please contact Grace to find out if Z-Connector is your cheaper alternative.