x、y速激光扫描头

laser scannerhead(laser scanner,optical scanner ,mark head) A whole laser scanner head consists of two scann mirrors,two galvanometers&drive cards,a xy mount(galvo mount) a scan lens(f-theta lens),an interface card(D/A card),a set of marking software and DC power supply. Two types of scan optics for co2 and ND:YAG lasers are available.The scan field(or marking field)depends on the selection of the scan lens and ranges from 50*50mm to 255*255mm.The marking software supports various fonts, pictures(Plt,Bmp),automated series numbers,date,time,barcodes&DataMatrix 3D Engraving Head we can provide OEMs and system integrators with a range of high performance components and sub-assemblies of 3Dlaser engraving heads at more attractive prices.The head include a control card, a table with driver,a 2D marking head(as sho )and DC power supplies.The 3D engraving head can used in the laser subsurface engraving machines. The control card is used to control the table(step motor),position limits of the table,marking head and laser beam on/off.it is inserted onto the mother board of a computer . The drive softerware and laser engraving software comes with the control card. The dimension of the table is 365*120*55mm.The length of the screw is 230mm and the travl range is 120mm.There is a position limit on both ends.The signals are given via DB9