WL320无线超级备忘录的扫描仪

The device includes two parts: handled terminal and auto terminal. 3.1-1 handled terminal 1) LCD Display , 128*64 pixel display with contrast adjustment, Backlit 2) Enter key selects displayed 3) EXIT key go back to the previous screens 4) Up/down??? arrows-moves the selection pointer and scrolls up or down. 5) LEFT/RIGHT arrows-Select responses and moves cursor. 6) Power button 7) OBDII connector cable, connect car and the scan tool 8) USB port for update soft 9) Exterior power and electrification supply port/Charge 3.1-2 Car terminal 3.2 Product Specifications Transmission range: 30m (no barrier)l Battery: 280mAHl 3.7V Lithium battery Standby time: 4 Hoursl Display - Backlitl LCD,128*64 pixel display. Operating Temperature - 0 to 50? (??32 tol 122?) Internal Power - Lithium batteryl You can use auto onboard powerl charger to charge the device while charging the lithium battery of the device. New function software can be upgraded by running after connectingl the device to the computer. External Power: 5.0 VOLS provided via vehiclel battery. Dimensions: host-108mm*84mm*21mml OBDII-50mm*47mm*28mm 3.3 Product Features Works on all 1996 and newer cars & light trucks that are OBD II compliant (including the VPW, PWM, ISO, KWP 2000 and CAN protocols) Reads and clears generic and manufacturer specific Diagnostic Trouble Codes (DTCs) Reading Freeze Frame Data Testing I/M Reading Status Reading vehicle info Rescanning Data 4. Operating Instructions 1. Car terminal Operating Instructions 1) Turn the ignition off 2) Locate the 16-pin Data Link Connector (DTC), and plug into the Car terminal to the DLC. 3) It enters the ECU system successfully when you see the red led flicker. About more details, please download the PDF file.