WGP类型的牙齿弯曲的联合器、王储、装备coupli

Gear coupling, Gear shaft, Gear joint, Tooth coupling, Drum shaft, Drum coupling, Crown gear coupling, Gear shaft coupling, Curved tooth coupling(1). Model: WGP1 ---WGP14 Gear Coupling (2). Nominal torque: 0.8---180 kN.m (3). Allowed speed: 4000—1200 r/min (4). Diameter of brake disc: 315---1000mm (5). Weight of brake disc: 6.7---128.8kg (6). Bore diameter: 12---260mm (7). Bore length: 32---410mm (8). Rotary inertia: 0.0078---17.48Kg.m2 (9). Lubricating grease: 0.11---6.6kg (10). Weight: 5.62---523kg Application: used to equip with disk brake. Gear coupling, crown gear coupling advantage: Compensate for axial displacement and angular displacement, sustain over load and impact load, smoothly transmission, low noise, high efficient (over 90%), well-sealed, good quality, easy to mount and maintenance.Shang Maud Group has been committed to new technology development, which has made plenty of achievements. Maud gives these following products and service: (1). the first generation of involute spline cross universal coupling. (2). Heavy-duty universal coupling used on hot rolling mill for medium plate (3). Application of the new generation of cross adjustable bearing (4). Application of modification stub thick gear technology (5). Design optimization of cross assembly u-joints structure (6). GSL Crowned gear extension coupling (participates in standard development JB/T10650-2006) (7). Split roller bearing with pedestal for metallurgical equipment. (participates in standard development JB/T10540-2005) (8). Tooth spindle for Master Drive of Continuous Hot Rolling Finishing Mill (standard development)