water-based Epoxy Primer paint

water-based Epoxy Primer paint

北景乡, 中国
北景乡, 中国
公司
86-010-85745871
Shawnee Liu
联系人姓名

基本信息

D-77 Teligu water-based Epoxy Primer paintProperties 1. use water as the diluent, non-toxic, environmental protection material, avoiding the risk of fire. 2. Enhance the adhesion between the base and the painting layer3. suitable for the wet surface4. with a one-way ventilation5. Lower cost than the solvent-based material6.with no bad solvent smell during the construction process.7. With water permeability, it can well protect the floor from being damaged by the water pressure.ApplicationWidely used in damp ground, high-level working areas, basement wall and floor, office floor, house decoration, and some places have a high demand of environmental protection. Places have a high demand of dust-free, clean, and anti-abrasion, well decoration effect, such as food factory, industrial workshop, electric factory Suitable for the non-ventilated enclosed places.Technical parameters ItemText Standard and DescriptionIndexMaterialEpoxy and curing agentColorLight brownTouch Dry (h)25°C4Hard Dry (h)25°C24Adhesion GradeGB/T9286-1998≤0Solid contentGB/6751-8645%Pencil hardGBT/6739-1996≥2Impact resistance (kg·cm)GB/T1732-9350FlexibilityGB6742-861Material Consumption 0.08 kg/m2Package Teligu Water-based Seal Premier D30Part A 5kg (Main agent, transparent)Part B 20kg (curing agent, light liqud)Batching ratio(weight ratio)A:B=1:4Construction designStir the Part A and Part B fully in 3-5 minutes.Because of the large difference in the viscosity of the two materials, we suggest that stir the equivalent Main agent and curing agent firstly, then add the left curing agent. Rolling coating once for general coating.After Hard Dry, continue the next step coating Cautions 1. It is water-based epoxy premier. Brush on the plain clean surface, dry or wet surface, but without water on the surface.2. The ambient temperature is above 15°C, relative Humidity under 90%. The relative humidity affect the gloss, the lower humidity the higher gloss.3. The epoxy resin Part A and Part B must be strictly mixed under the guiding proportion. After fully stirred, it can be roller painting4. Please increase the coating times when the surface is too bad.5. It’s better to used up in 30min after mixed. In case of waste the batching quantity accords with the consumption.6. Gelled paint can not be used.7. Construction by the professionals

交货条款及包装

賣家沒有明確指定交貨條件。 有關更多信息,請聯繫賣家。

付款条款

Letter of credit

Telegraphic transfer

Фотографии

    密码恢复
    要恢复您的密码,请在下面您的电子邮件地址框与您已注册请输入:
    The password reset code has been sent to your Email.
    Код уже был отправлен Вам ранее.
    Вы можете ввести его в поле выше, или получить новый код через сек.
    发生了错误。请检查您的电子邮件地址,然后再试一次。
    Ваш новый пароль:

    名称为空


    Выберите страну доставки

    您还没有写消息

    By clicking on the "Send" button, you agree that your data will be used to process your request. Further information and revocation instructions can be found in the data protection declaration.

    已发送您的消息!

    親密

    1
    Рынок B2B
    取消
      查看更多
        地區搜索
        全球
        Категории
          产品名称
          !

          欢迎您!

          很抱歉,但这个版本在中国语言网站正在开发中,可能包含错误!

          或者,也可以选择其他语言: