waste tire recycling line

Technical Features of Waste Tire Recycling Machinery: 1. Tire Cutter: To cut off the inner steel rings of tires. 2. Tire Crusher: To crush tires into blocks of 500mm or so. Crushed blocks are sent back to the crushing room through a filter system for re-crushing. Standard blocks will be filtered through round wire mesh during the process. 3. Intermediate Rubber Crusher: To smash rubber blocks into rubber granules with size from 5 to 10 meshes. 4. Magnetic Selector: To separate steel wire from the rubber grains. Rubber granules under normal temperature. 5. Fine Rubber Crusher: To smash 6-12mm rubber granules into 1-3mm rubber granules under normal temperature. 6. Double--grinding-pan Rubber Grinder: To grind 5-10 mesh rubber granules into 40-120 mesh rubber powder. 7. Air-current Sorting Machine: To create air eddy and separate rubber granules and the nylon fiber then to sort the rubber powder into two kinds: Rough fine ones ranging from 40-120 meshes. 8. Quantified Bag Filler: To fill rubber powder into the bag according to customer need.Application: The plant is applied to recycling of waste tire. It works efficiently, energy-saved, lowering labour. It was exported to Indonesia, Russia and Vietnam, etc.