UNLOCKEDVT2542 2-ports voip gateway,it with 2ports VoIP,4ports router and wireless router,it can be used every countries. The front panel provides the following lights: 123 Sectio n Light Description 1 Wireless Indicates the status of the wireless network: If the Wireless LED is • Solid green, the wireless network is active. • Green and flashing, there is wireless network activitiy. • Off, the wireless network is not engaged. 2 Phone 1, 2 Indicates the status of phone line one and optional line two, respectively: If the Phone (1, 2, or both) LED is • Solid green, the phone for that line is on hook, registered with Vonage, and ready for use. • Green and flashing, the phone for that line is ringing or off hook. • Orange, you have voice mail. • Flashing in unison with the Power light, the voice gateway is downloading a firmware upgrade from Vonage. Please do not unplug or disconnect your voice gateway while it is downloading firmware. • Off, the phone line is not registered for Vonage service. You cannot use it for phone calls. 3 Internet Indicates the Internet connection speed: If the Internet LED is • Solid green, your connection speed is 100Base-T • Solid yellow, your connection speed is 10Base-T The LED flashes when there is activity on the Internet connection. 4 Ethernet 1 -4 Indicates that a device is connected to the port and the speed of the Ethernet connection: If an Ethernet LED is • Off, no device is connected to the port • Solid green, a device is connected to the port (100Base-T) • Solid yellow, a device is connected to the port (10Base-T) A flashing yellow or green LED indicates that there is activity on the Ethernet connection. 5 Power If the Power LED is red — blinking or solid — restart the voice gateway. During the power up, the voice gateway flashes several times while connecting, retrieving the IP address, and downloading configuration information from Vonage. • During firmware downloads (optional), the Phone and Power LEDs flash rapidly. Please do not unplug or disconnect your voice gateway while it is downloading firmware. • When the Power LED is a solid green, the voice gateway has successfully registered with Vonage. If a firmware upgrade was needed, it has been successfully completed. Rear Panel The rear panel provides the following ports: Key Item Description 1 Power Connector for the AC power adapter. 2 Reset If you lose your internet connection, use the reset button to reestablish communication. 3 Ethernet 1 -4 Ethernet ports that let you to connect up to four devices to your voice gateway. 4 Internet Connect your cable or DSL modem to the VT2542. 5 Phone 1 and 2 Connect one or two phones to one and two (optional). If you subscribe to only one phone line from Vonage, you must connect your phone to the Phone 1 port. 6 Antenna Rotatable antenna used for wireless connections. WAN Setup for a Static IP Address (Cable Modem) Type the following in dotted-decimal format as assigned by your cable provider: Optional fields and buttons are: Options We recommend leaving the following selected: • NAT — Enables Network Address Translation • Firewall — Enables the VT2542 firewall IP Address The static IP address Mask The subnet mask Gateway The gateway IP address Default Gateway The default gateway IP address DNS 1, 2, and 3 One to three domain name server IP addresses Override MAC If your cable or DSL provider associates a particular service to a specific device, such as your computer, select this field and type that MAC address in the MAC field to use as a “virtual” WAN MAC address instead of the VT2542 MAC address. By default, the MAC address printed on the VT2542 is displayed in this field. Restore Restores the actual VT2542 MAC address.