Vibrators & Flow Aids

Vibrators and Flow Aids Vibrators and Flow Aids are important accessories for regular storage and efficient discharging of all kinds of bulk materials. In a bin or silo, flow is faster in the centre than near the wall. However, central mass flow is evenly transmitted to the outer bin or silo section from where, through inertia, material slides down more slowly but without any interruption. Only very few bulk materials are extremely free flowing. The majority cannot be extracted from silos, bins or hoppers without some kind of flow aid. Many silo outlets show unmistakable signs of the oldest of all flow aids, the hammer. Once it has become obvious to the user that it always takes a few blows to make the material flow, usually along with level control devices automatic flow aids are installed too. Nantong ZhenQiang Machinery, supply a wide range of flow aids for bulk solids and applications of all kinds. Along with aeration and percussion equipment the product range includes Electric and Pneumatic External Vibrators which are also successfully used in screening, conveying, compacting, cleaning, sorting, and detaching processes. General features : Power supply: Three-phase voltage from 100V to 690V, 50Hz or 60Hz Polarity . 2 standard pole Revolution: 2900 r. P. M (50Hz) Functioning: Continual service (S1) at maximum declared Centrifugal force and electric power Insulation class: Regular Class B Class F (155 º C), class H (180 º C) on request. Glass of protection: IP 55-65 (on request) Ambient temperature: Less than 40 º C(if exceeded, please refer to our manual) Material: Die cast iron Main technical data: Model