Vibrating Conveyor

Level Vibrating Conveyor ZDS vibrating conveyor is an important inertia-vibrating conveyor. It has simple structure and various forms and specifications, which can meet the demand of short and intermediate transportation of all kinds of small block, granular, and power material widely used in different environment in various industry. ZDS vibrating conveyor commonly consists of vibrating source-vibrating motor, vibration generator supporting body, damping bearing, load-supporting base, related accessories kit, and so on. According to on-the-scene using environment and speciality requirement of the material transported, the supporting body of the conveyor can be made in the structure of U-groove and tubular shape. It can also be made in open-type and enclosed type according to sealing requirement to fit different techonological process. Because the supporting body is made of metal and the lubricating points are far from material, not only all kinds of normal temperature and common material, but also many high temperature and poison-contained conventional material can be conveyed. If making additional work on the supporting body, other techonological requirements can be realized during transportation, such as filtration, dryness, warming-up and cooling of the material. Table 1: the main technical parameter of ZPS motor vibration horizontal conveyor The programming instruction of product model 3--------Conveying distance (m) ZPS------Vibration horizontal conveyor 50-------Conveying length (dm) 40-------Conveying width (dm) G--------Inertia ZS-------Vibrating conveyor Selection description 1 ZS vibrating conveyor, which is non-standardization conveying equipment, has many modes and specification. The equipment mode and specification parameter listed in following table are finalized product value, only for users consulting. 2 The vibrating source and vibration generator can be fixed at both sides of the conveyor as well as its upper or lower parts. If there is no special requirement, the delivery is side-installed. 3 On- the-scene surveying and mapping and non-standard design can be provided to meet special requirement