Twin-Screw Sealant Automatic Production Line

Twin-Screw Sealant Automatic Production Line

原价: 10 000 USD
广州市, 中国
广州市, 中国
公司
86-20-84065801
Sunny Wong
联系人姓名

基本信息

Twin-Screw Sealant Automatic Production Line SLG-75 continuous silicone sealant ptoduction line is production line with twin-screw machine as main production equipment,loss-in-weight feeder as main measuring equipment.all materials are automaticaly and continuously fed into the twin-screw machine via the measuring device,and products come out continuously.compared with planet type reactor's intermittent production mode has the following advantages: 1. production capacity is much higher than that of intermittent production mode,with per hour production capacity of 600-800kg and daily production of 16-18 tons,with high production efficiency; 2. feed in raw materials and products come out immediately,with no need of base stock,with no intermediate products,with no intermediatestocks,intermittent production mode needs process production,and it may need several days for products to come out after purchasing raw materials; 3. high input-output ratio,due to continuous production method,no midway equipment cleaning is needed,and thus there's no waste of materials,and product rate is near theoretical value,the input-output ratiois 2%-3% higher than intermittent production mode,with annual saving of materials of 100-150 tons; 4. the entire production process is closed,with no material exposure in air,requiring no equipmentcleaning,saving cleanser and supporting materials,with no environment pollution and no harm to operator's health; 5. during normal production,each line only needs 3-4 person/shift,which is only 1/2-1/3 that of intermittent production mode,with high labor efficiency and saving labor cost and greatly reducing labor intensity; 6. the entire production process is closed, thus avoiding such quality problems of grains,breadcrusts,bubbles and so on,related with intermittent production mode; 7. due to continuous production,twin-screw dispersion strength is extremely high, so the product performance made of the same formula is about 20% better than products of intermittent production mode; 8. due to continuous production,there are lots of adjustable parameters in production,so on-line produc quality adjustment is possible,which guarantees consistency of product quality,but intermittent production mode puts materials into production and then has products come out,so quality can be known only after products come out,and cannot be adjusted on-line,product quality fluctuation is not easy to control,continuous production has no batch quality fluctuation,with extremely good consistency; 9. continuous automatic production fully controls process with computer,operators set technological parameters via computers,and realize total tracking of production process,which means all technological parameters in production can be fed back real-time via computer for direct analysis,for operators to control at any time,and for in-time adjustment of fluctuation occuring in production;

交货条款及包装

Packaging Detail: wood frame packing Delivery Detail: 30 days
端口: GuangZhou

付款条款

Letter of credit

Telegraphic transfer

Фотографии

    密码恢复
    要恢复您的密码,请在下面您的电子邮件地址框与您已注册请输入:
    The password reset code has been sent to your Email.
    Код уже был отправлен Вам ранее.
    Вы можете ввести его в поле выше, или получить новый код через сек.
    发生了错误。请检查您的电子邮件地址,然后再试一次。
    Ваш новый пароль:

    名称为空


    Выберите страну доставки

    您还没有写消息

    By clicking on the "Send" button, you agree that your data will be used to process your request. Further information and revocation instructions can be found in the data protection declaration.

    已发送您的消息!

    親密

    1
    Рынок B2B
    取消
      查看更多
        地區搜索
        全球
        Категории
          产品名称
          !

          欢迎您!

          很抱歉,但这个版本在中国语言网站正在开发中,可能包含错误!

          或者,也可以选择其他语言: