铜斑蛇鹤&吊Rayway移动electri

Copperhead Conductor Systemsare used for high-temperature, high dust, high corrosion, and other adverse circumstances.Superb quality of heavy duty of bimetallic (copper & steel) crane bar, of which the rated current ranges from 300 amperes up to 3,000 amperes enough to satisfy all the capacity for cranes running especilly at iron & steel mills,heavy industrial plants, etc.., which are exposed to extremely high temperature duing operation. Standard application dataNominal Current (at 100% duty cycle) [A]: 300 - 500 - 800 - 1000 - 1500 - 2000 - 3000Nom. Voltage [V]: 600-3000 (with add. insulators)Rail Length [mm]: 6.000 Weight(kg):24 - 26 - 30 - 36 - 51 - 72 - 120Operating Conditions: for indoor and weather protected outdoor applicationsTrack Configuration: straight / easy onside adaptation to course layoutA complete set of 6 meter copper headed steel rail crane bar: To consist ofcopper headed steel rail crane bar (trolley bar / bus bar), Joint keeper, Joint cover, Expansion section,Hanger clamp with insulator, Power feeder, Locating clamp, Pantograph collector, etc. Detailed specifications and photos of each component are available upon request. Maintenance--After installation,Make sure that the sliding hangers are straight (in a perpendicular position) after nuts have been tightened to guarantee free sliding of the powerail.The powerail must be installed exactly straight and parallel to the machinery track.--Before running the powerail,Check the system for esay running of the current collector trolleys,i.e.there may be no resistance by an excessively narrow slot or pull by the connecting cable.--Every 3 up to max.12 months,-depending on the frequency of operation and travel distance-,check the carbon brushes and mechanical componets for wear and replace them if necessary.