Tengen solar water heaters

Solar water heaters Inner tank: imported 304 2B food grade stainless steel Thickness is 0.5mm Outer tank: imported nacre white armor plate or stainless steel Insulating layer: 50 to 60mm high pressure polyurethane foam Bracket: premium cold roll bracket stainless steel screw Vacuum tube: 3.3 high borosilicate glass (47/58mm) The vacuum tube of our solar water heater has the high absorption rate and low emission rate, the absorption rate is 0.90 to 0.93 (AM1.5) The emission rate is 0.05 to 0.075 (80± 5) Vacuum tightness is P ≤ 5.0 x 0.0001Pa Idle sunning property parameters is Y = 220 to 260/kW The average heat loss coefficient is Ult = 0.6 to 0.7W (.) It means the temperature in the water tank is ranging from 50 to 95 Type: 16, 18, 20, 24, 26, 28, 30and36 tubes Capacity: 130 to 300L Characteristics: Best angle of stand makes the heat efficiency is very high All of the inner tank is produced by high-frequency ring welding or argon arc welding, which is very durable; high density The insulating layer made of high pressure polyurethane foamed The water inlet or out let can be set up as your asked Intelligent controller or electrical heat element can be chosen for this system according to your requirement Advanced technology, which can dispose of scale, bacteria and prevent electricity Environmental friendly