TD5010/5011 Spectrum analyzer

TD5010/5011 Spectrum analyzer can be widely used in areas such as Telecommunication and CATV. TD5010/5011 Spectrum analyzer will exceed 1GHz(0.15 1050MHz), has the glancing or fine adjust center frequency with the 100KHz/DIV 100MHz/DIV span select, and composes the simple frequency-domain. One 4 and 1/2 bit LED display can be selected for the center frequency and making frequency reading. TD5011 has a tracking generator, this instrument can be used to the pre-research testing, can detect the mobile phones RF circuits native signal, intermediate frequency, radiation signal etc. The spectrum analyzer is used to examine and repaired that mobile phone which cant going the web. It is very conveniently and exactly. * Frequency range: 0.15 to 1050MHz * One 4 and 1/2 bit digital display.(Center frequency,0.1 MHz resolution) *Tracking generator (only the TD5011) Specifications Frequency range: 0.15 to 1050MHz Center frequency display accuracy: ±100KHz Maker accuracy:0.1% spans 100 KHz Resolution of frequency display:100KHZ(4.5 digit LED) Frequency scans width accuracy: ±10% Frequency stability: better than 150 Khz/hour IF Bandwidth (-3dB):400 KHz and 20 KHz; Video-Filter(ON)4KHz Sweep rate: 43Hz Amplitude range:-100dBm to +13dBm Screen display range: 80dB (10dB/div.) Reference level:-27dBm to +13dBm (in 10dB steps) Reference level accuracy: ±2dB Average noise level:-90dBm (20 KHz Bandwidth) Distortion:<-55dBc of 2nd and 3rd harmonic Third order intermod:-70dBc (two signals >30MHz apart) Sensitivity: Better than-90dBm Log scale fidelity: ±2dB(without atten.)500MHz Input attenuator: 0 to 40dB (4*10dB steps) Input attenuator accuracy: ±1dB/10dB Max. Input level:+10dBm, ±25VDC(0dB atten.)+20 dBm (40dB atten.) Frequency scans width: 100 KHz/div.to 100MHz/div. In 1-2-5 steps and 0Hz/div.(Zero Scan)