Synthetic Calcium Aluminate Slags - 2011 Hot

Introduction At present, most steel plants in the world generally adopt Ladle refining, to reduce gas inclusion and make molten stell evenly, in order to realize high yield, high quality and low cost steel making. So Synthetic Calcium Aluminate Slags is designed and manufactured to meet the above requirement and take a very important role in steel refining. Properties Low molten point, fast molten, shorten refining time and energy consuming. Good fuidity, desulphurization and inclusion reducing No flame, little dust emission and good safety in use No water absorption and no metamorphosing Effectual submerged arc, and reduce electric arc to burn and erode ladle lining, and enhance ladle life. Specification 1. CaO: 49 - 54% Al2O3: 41 - 45% SiO2: 3.8% max. TiO2: 2.8% max. Fe2O3:1.8% max. MgO: 2.0% max. 2. CAO : 53% - 56% , AL2O3 : 32% - 37% , SIO2 : 4%MAX , FE2O3 : 1.5% MAX , MGO : 3% MAX , P : 0.05% MAX , S : 0.1% MAX 3. Al2O3 39 - 43%CaO 32 - 36% SiO2 5.5% max Fe2O3 3% max TiO2: 4% max MgO: 11 - 15% 4. CaO: 47-53%, Al2O3: 43-49%, TiO2: 0.05% max, Fe2O3: 0.15% max, SiO2: 1% max, MgO: 0.2% max, S: 0.08 max 5. CaO 48-53 %, Al2O3 38-43 %, SiO2 3.5 %MAX, TiO2 2 % MAX, Fe2O3 1.2 % MAX 6. MgO 10,5 % min, CaO 22,0 % min. Al2O3 49,5 % min. SiO2 7,0 % max. Fe2O3 3,5 % max. TiO2 4,0 % max. 7. CaO33%Min. Al2O350-55% SiO26.0% Max. TiO24.0% Max. MgO 2.0% Max.Fe2O32.5% Max. 8. CaO :47-56%, Al2O3 : 35-44%, SiO2:5% max. Fe2O3:2.0% max. P: 0.15% max, S: 0.15% max 9.MgO:11.0% min, CaO:32 % min, Al2O3:39% min, SiO2 : 5.5% max, Fe2O3:3.0% max, TiO2 : 4.0% max 10. CaO: 45 - 52%, Al2O3: 33-40%, MgO: 8-15%, SiO2: 3% max, S: 0.1% max, P: 0.05% max, TiO2: 0.06% max Size: 0-30 mm Melting point: 1350 C max Principal mineralogical phase: C12A7 CAS No.: 65997-16-2 or 12042-68-1 Other specification can be manufactured according to customers requirement. Application Method Adding Calcium Aluminate in the furnace. Dosage: one ton molten steel needs Calcium Aluminate around 2-10 kg, and density of molten steel is greater than Calcium Aluminate. Then, argon gas is pumped in from the bottom of furnace, it drives the calcium aluminate to mix with the molten steel completely. Meanwhile, the molten Calcium aluminate adsorbs sulphur substance. Finally, dregs will suspend on the surface of molten steel due to it’s low density and can also keep warmness. Application Functions Desulphurization Deoxygenation Impurities absorption Ladle lining protection Packing 1200KG, 1000KG per sack