SY-366 GP NEUTRAL SILICONE SEALANT

SY-366 GP NEUTRAL SILICONE SEALANT PRODUCT DESCRIPTION SY-366 is a one-component neutral silicone sealant. It bonds excellently with most building materials. It possesses excellent features as follows: Easy use: extrude to use whenever is needed;Excellent thixotropic and extrusion property, can be extruded out at any temperature from -40c to 100c;Excellent adhesion to most building materials;Good resistance to UV, ozone and weatherproofing property. Application range SY-366 is suitable for sealing various architecture doors, windows and glazing. Performance data (for reference) Note: the following data are for reference only, not recommended stipulating. 1. Drooping (mm) <2 GB/T 13477.5-2003 2. Surface dry (h) <=3 GB/T 13477.5-2003 3. Solidification time (humidity 50+-5%, temp 23+-2c) 7-17 days 21 days after cure humidity 50+-5% temp 23+-2c: 1. Hardness 28 GB/T 531-1999 2. 60% tensile adhesion no ruins GB/T 13477.8-2003 3. Tensile limit % 180 GB/T 13477.8-2003 4. Sealant grade 12.5E ISO 11600 or JC/T 881-884-2001 Service restrictions SY-366 is not suitable for structural assembly. It is difficult to use in the following conditions: All materials that exude grease, plasticizer or solvent, some unvulcanizing or partly-vulcanizing rubber and adhesive tape;airtight spot (silicone sealant needs steam to cure);place where is soaked in water or damp underground throughout the year;paint surface, film cracking or peeling-off might lead to seal failure;frosting or damp surface;direct food contact surface;Subject to mechanical abrasion surface.