switch mode power supply

S-150 seriesswitch modepower supply: 1.Features: 1, Low price and high reliability 2, 105 centidegree output capacitor 3, AC input power suitable for the world 4, High efficiency and low operation temperature 5, Soft-start current can reduce the AC input impact effectively 6, With short-circuit and overload protection 7, Compact size, light weight 8, 100% full-load burning test 2.Specification: SpecificationS-150-5S-150-7.5S-150-9S-150-12S-150-13.5S-150-15S-150-24S-150-27S-150-48DC output voltage5V7.5V9V12V13.5V15V24V27V48VOutput voltage error (Note2)±2%±1%±1%±1%±1%±1%±1%±1%±1%Rated output current30A20A16.7A12.5A11.2A10A6.5A5.6A3.2AOutput current rage0-30A0-20A0-16.7A0-12.5A0-11.2A0-10A0-6.5A0-5.6A0-3.2AWave and noise(Note3)150mVp-p150mVp-p180mV180mV180mV180mV240mV240mV240mVInlet stability(Note4)±0.5%±0.5%±0.3%±0.3%±0.3%±0.3%±0.2%±0.2%±0.2%Load stability(Note5)±0.5%±0.5%±0.3%±0.3%±0.3%±0.3%±0.2%±0.2%±0.2%DC output power150W150W150.3W150W151.2W150W156W151.2W153.6WEfficiency78%80%80%82%83%84%85%86%87%Adjustable range for DC voltage4.5-5.5V6-8.3V8-10.4V10.6-13.2V12-15V13.5-16.5V21-28V24-30V43-53VAC input voltage range85 to132VAC/176 to264VAC SELECTED BY JUMPER OR SWTCH 47 to63Hz;255 to370VDCInput current3.2A /115V 1.6A/230VAC impulse currentCold-start current 35A/115V 60A/230VLeakage current<3.5mA/240VACOverload protection105 to150 Type PULSING HICCUP SHUTDOWN Reset:auto recoveryOver-voltage protection115% to135%High-temperature protection……Temperature coefficient±0.03% centidegree (0 to50 centidegree )Setup rise hold up time100ms,50ms,20msVibration10 to500Hz,2G 10min./1cycle,Period for 60min,Each axesWithstand voltageInput and output interval 3KVAC, Input and enclosure 1.5KVAC, Output and enclosure 0.5KVACIsolation resistanceInput and output interval , Input and enclosure, Output and enclosure 500VAC/100M OhmsWorking temperature and humidity-10 centidegree to+60 centidegree , 20% to90%RHStore temperature and humidity-20 centidegree to+85 centidegree, 10% to95RHOverall dimension199*110*50mmWeight0.8KgsSafety standardsMeet UL1012,TUV EN60950EMC standardsMeet CLSPR22(EN55022), IEC801-2,3,4,IEC555-2 VerificationNote:1.The testing condition for the parameter above is:230VAC input, rated load,25 centidegree 70%Rh,Humidity 2.Error,include the setting error, line stability and load stability.(Note:5) 3.Wave test:adopting“A12”double wire for 20MHz,and 0.1uF&uF capacitor short-circuit for interrupting 4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is representative to the highest voltage. 5.Load stability test: The load is from 0% to 100%,others 60%. 6.C2 3 11must be knocked down. 3.Label: