Stone Machine(Stone Edge Cutting Machine)

Feature of the cutting machine: casting structure improves the stability and cutting accuracy. This structure avoids the weakness of being out of shape of the machine and trembling of the cutting part; idler wheel of terrace and slideway are sealed in the lubrication oil groove which extends the bearing of the wheel and slideway. And it is easy to operate and saves more labor force.Thisstonemachine is adopted to cutting thick slab under 20cm.Because the structure of the machine is stalwart, the stability is good. It is high in precision to cut slab. Installing stripe cutting tool in this machine, it can cut the stripe and pane stones which are widely used on the urban construction, square and so on. The stones can be not only skid prevention, but also artistic. 1-Machine is for stone and marble cutting WITH ONE PIECE SAW HEAD. 2-Machine saw head can turn 45 degree to cut marble or stone 45 degree as angle type 3-Working table work with hand manul ( can be changed to automatic forwarding) 4-Its rmp nearly 2500 rmp/min 5-Power 15 KW nearly 20HP Working voltage 3 phases 380V 50 Hz 6-Saw outlier diameter: between 300mm-600mm Flange tray for fix blade 180mm(inside diameter :50mm,80mm) 7-Machine has control panel with buttons and automatic 8-Cutting will be with saw and water. 9-It need water for cooling blade. Water is recycle 10-Error :for example size 600mm*600mm the parallel error within 0.2mm the diagonal error within 0.5mm 11- The machine withtwo guiding rule ,one is for fixing position another is for scale