sprag cage

bearing cage DC5476A 1.Type DC5476A(4C) is a sprag type freewheel cage without inner or outer races. Its model and construction is followed for, this type provides higher torque and lower noise while fixed convenient. 2.It must be installed in a design providing races, bearing support for axial and radial loads, lubrication and sealing. 3 .The sprag space tolerance must not be exceeded. Inner and outer races must both have a minimum plain widthe, without any recess, to ensure the freewheel functions correctly as shown on following pages. 4. We can offer standard inner and outer races, as shown on the following pages. 5. Alternatively, races can be made in case hardened steel shafts, or housings, to the specification below. 6. Surface hardness of the finished pargt should be HRC 60 to 62°, for a depth of 0.6mm minimum. 7. Core hardness to be HRC 35 to 45°. Surface roughness not to exceed 22CLA . Maximum taper between races:0.007mm for25mm Width. Type modele Overrunning speedsSprag spaceWeight TKN1)nmax2)nmax3) (min-1)acemindminbmax (Nm)(min-1)DC5476A(4C)4203,5001,70054,76571,4258.331692424240.13Other type: DC2222G DC2776 DC3034 DC3175(3C) DC3809A DC4127(3C) DC4445A DC4972(4C) DC5476A(4C) DC5476A DC5476B(4C) DC5476C(4C) DC 5776A DC6334B DC7221(5C) DC7221B(5C) DC7221B DC7969C(5C) DC8334C DC8729A DC10323A(3C)* DC 12334C* DC12388C(11C)